Troubleshooting Guide

The messages shown below display your systems condition.

EJECT:

No disc magazine has been loaded in

 

the changer. The disc magazine is not

 

completely loaded.

 

➪ Load the disc magazine properly.

 

No CD in the unit.

 

➪ Insert the CD.

NO DISC:

No disc has been loaded in the disc

 

magazine.

 

➪ Load a disc into the disc magazine.

TOC ERR:

No disc has been loaded in the disc

 

magazine.

 

➪ Load a disc into the disc magazine.

 

The CD is quite dirty. The CD is upside-

 

down. The CD is scratched a lot.

 

➪ Clean the CD and load it correctly.

E-05:

The CD is upside-down.

 

➪ Load the CD correctly.

BLANK:

Nothing has been recorded on the MD.

NO TRACK:

No tracks are recorded on the MD,

 

although it has a title.

E-15:

Media was played that doesn’t have data

 

recorded that the unit can play.

 

➪ Use media that has data recorded that

 

the unit can play.

NO PANEL:

The faceplate of the slave unit being

 

connected to this unit has been removed.

 

➪ Replace it.

E-77: The unit is malfunctioning for some reason.

➪Press the reset button on the unit. If the "E-77" code does not disappear, consult your nearest service center.

E-99: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.

➪Check the disc magazine. And then press the reset button on the unit. If the "E-99" code does not disappear, consult your nearest service center.

HOLD:

The protective circuit in the unit activates

 

when the temperature inside the

 

automatic disc changer exceeds 60°C

 

(140°F), stopping all operation.

 

➪ Cool down the unit by opening

 

the windows or turning on the air

 

conditioner. As the temperature falls

 

below 60°C (140°F), the disc will start

 

playing again.

LOAD:

Discs are being exchanged in the Disc

 

changer.

READING:

The unit is reading the data on the disc.

IN (Blink):

The CD player section is not operating

 

properly.

 

➪ Reinsert the CD. If the CD cannot be

 

ejected or the display continues to flash

 

even when the CD has been properly

 

reinserted, please switch off the power

 

and consult your nearest service center.

PROTECT (Blink):

The speaker wire has a short-circuit or touches the chassis of the vehicle, and then the protection function is activated.

➪Wire or insulate the speaker cable properly and press the reset button.

NA FILE:

An Audio file is played with a format that

 

this unit can’t support.

 

➪ ----

COPY PRO:

A copy-protected file is played.

 

➪ ----

DEMO MODE: The Demonstration mode has been selected.

➪The <Demonstration mode Setting> (page 26) is ON. Turn it OFF.

38 English