Playing CDs:
Press the 0(EJECT) button to slide open the faceplate,
showing the CD (insertion) slot. Holding the CD with the
labeled side facing up, insert it in the slot.
The faceplate will close, and the CD will start playing.
The IN indicator will light when a CD has been inserted.
Playing CDs Already Inserted:
Press the SRC button repeatedly until the CD mode is
obtained. "CD" is displayed when the CD mode has been
selected.
The CD will start playing.
Pausing and Restarting CD Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
Eject:
Press the 0(EJECT) button. The faceplate will slide to eject the
CD.
Press the 0(EJECT) button to close the faceplate.
•Do not attempt to insert a CD into the slot if another one is
already there.
•The unit can only play 12-cm (5-inch) CDs. If you insert an 8-cm
(3-inch) CD, it will get stuck inside and can cause the unit to
malfunction.
•When the faceplate has been slid open, it might interfere with
the gear lever or something else. If this happens, pay attention
to safety and move the gear lever or take an appropriate action,
then operate the unit.
2CAUTION
Playing CDs
CD/External disc control features
— 26 —
English
PTY
LOUD
OFF
NF
DAB
AUD
VOL ADJ
MENU
ANG
NAME
DISP
DISP/
NAME
SRC
CLK SCAN
RDM
REP M.RDM DISC-
0
38
DISC+ ¢
4
KDC-PS9590R/9090R
KDC-8090R
Track number Track time
Disc title/Track title/DNPS
IN indicator
Disc number
Track number Track time
Disc title/Track title/DNPS
IN indicator
KDC-PS9590R/9090R
Description about this indicator for these features can be displayed
by setting the Lower Part Display (page 12) to
"... + Function indicator."