Speaker setting allows the System Q settings to be fine-tuned
according to the type of speakers.
Woofer setting allows for Network configuration according to
the type of subwoofers.
Press the SRC button repeatedly to select the standby mode.
"ALL OFF" is displayed when the standby mode is selected.
Press the Q button to enter the speaker setting mode.
Each time you press the FM/AM button, the mode switches as
follows:
•In speaker setting mode
Press either the 4or ¢button to select the type of
speaker. The setting switches as follows.
Off ("Speaker Setting OFF") /
For 6/6x9 in. speaker ("Speaker Setting 6*9/6 inch") /
For 5/4 in. speaker ("Speaker Setting 5/4 inch") /
For the OEM speaker ("Speaker Setting O.E.M.")
•In woofer setting mode
Press either the 4or ¢button to select the type of Sub
woofer. The setting switches as follows.
"Woofer OFF" / "12in type A" / "10in type A" / "12in type B" /
"10in type B" / "12in type C" / "10in type C" / "8inch" / "12in
type D" / "10in type D"
Press the Q button to end the speaker setting mode and
woofer setting mode.
•Speaker setting function allows for tuning of bass, middle and
treble.
•Woofer setting allows for tuing of high-pass filter frequency,
low-pass filter frequency and non-fading level.
NOTE
5
4
Speaker setting mode
Woofer setting mode (KDC-PS9590R/9090R only)
3
2
1
Speaker & Woofer setting
You can recall the best audio setting preset for different types
of the music.

Switching the Preset Sound Setting:

Each time you press the Q button, the preset sound setting
switches as follows:
The System Q function changes the values of the following
sound quality parameters:
Bass centre frequency, bass level, bass quality factor, bass
extend, middle centre frequency, middle level, middle quality
factor, treble centre frequency, treble level non-fading level, high-
pass filter frequency for front output, high-pass filter frequency
for rear output, and low-pass filter frequency for non-fading
output.
Note that some of these parameters cannot be controlled by the
audio control setting feature. (KDC-8090R)
Their setting values are different depending on the setting of the
speaker and woofer setting mode.
NOTE
Flat
Easy
Rock
Jazz
Pops
Top 40
Scan of Flat – Easy
(Default setting)
User memory*
*User memory:
The unit returns to the state
adjusted the last time with
the audio control setting feature.
System Q
— 13 —
•Please see the menu settings about selecting the display mode.
For details refer to the Switching Display Mode page for the
menu settings. (page 37)
•The same items cannot be selected for both the upper part and
the lower part.
NOTE