ISO connectors
Pin |
| Color and function | ||
A4 | Yellow |
| Battery |
|
A5 | Blue/White |
| Power control | |
A7 | Red |
| Ignition (ACC) | |
A8 | Black |
| Earth (ground) connection | |
B1 / B2 | Purple ª / Purple/black · | Rear speaker (right) | ||
B3 / B4 | Gray ª / Gray/black · | Front speaker (right) | ||
B5 / B6 | White ª / White/black · | Front speaker (left) | ||
B7 / B8 | Green ª / Green/black · | Rear speaker (left) | ||
Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring harness as illustrated below.
Ignition wire |
|
|
(Red) | A7 | (Red) |
Unit |
| Vehicle |
Battery wire | A4 | (Yellow) |
(Yellow) | Default wiring | |
| ||
Installing the unit
1
2 Before attaching, make sure the direction of the escutcheon is correct.
(Wider hooks on the top side.)
Connect the wiring harness to the unit. Other wiring connection has been completed earlier. (page 17)
Dashboard of your car
Bend the appropriate tabs to hold the mounting sleeve firmly in place.
Installing without using the mounting sleeve (Japanese car)
1 Remove the mounting sleeve and escutcheon from the unit.
2 Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with the supplied screws.
Removing the unit
1Detach the faceplate.
2 Engage the catch pin on the removal tools into the holes on both sides of the escutcheon, then pull it out.
3 Insert the removal tools deeply into the slots on each side, then follow the arrows instructions as on the right.
T:Toyota cars
N:Nissan cars
18