Kenwood KDC-4051UM, KDC-U3049, KDC-U349, KDC-U449 Changing the frequency steps, Adjust [SETTINGS] mode settings, SRC, Item, [FUNCTION], [SETTINGS], Selectable setting (Preset: *)

Changing the frequency steps (KDC-U449/ KDC-U3049/ KDC-U349 only)

You can change the frequency step of FM/ MW:

FM : 50 kHz to 200 kHz

MW : 9 kHz to 10 kHz

1Press and hold SRC to turn off the power.

2While pressing number buttons 1 and 5 (MEMO MY LIST), press SRC. Release your fingers from the buttons after the display appears.

To restore the initial setting, repeat the same procedure.

When the frequency step is changed, the frequencies in the memory are deleted.

Adjust [SETTINGS] mode settings

While listening to the radio...

1Press the volume knob to enter [FUNCTION] mode.

2Turn the volume knob to select [SETTINGS], then press to enter.

3 Turn the volume knob to make a selection, then press to confirm. See table below for selection.

4 Hold to finish the procedure.

Item	Selectable setting (Preset: *)
LOCAL SEEK	ON: Searches only stations with good reception (KDC-U449/ KDC-U3049/ KDC-U349: MW/ SW1/ SW2
	stations only ; KDC-4051UM: FM stations only). ; OFF*: Cancels.
SEEK MODE	Selects the tuning mode for 4 / ¢ buttons.
	AUTO1*: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset
	memory. ; MANUAL: Manually search for a station.
AUTO	YES: Automatically starts memorizing 6 stations with good reception. ; NO*: Cancels (automatic memorizing
MEMORY	is not activated). (Selectable only if [NORMAL/ NORM] is selected for [PRESET TYPE].) (page 7)
MONO SET	ON: Improves the FM reception (but the stereo effect may be lost). ; OFF*: Cancels (stereo effect resumes).
PTY SEARCH	Selects the available Program Type (page 9). Then, press 4 / ¢ to start searching.
	Press the volume knob to enter PTY language selection. Turn the volume knob to select the PTY language
	(ENGLISH*/ FRENCH/ GERMAN), then press to confirm.
NEWS SET	00M – 90M: Sets the time for receiving the next news bulletin. ; OFF*: Cancels.
AF SET	ON*: Automatically searches for another station broadcasting the same program in the same Radio Data
	System network with better reception when the current reception is poor. ; OFF: Cancels.
RDS REG	ON*: Switches to another station only in the specific region using the “AF” control. ; OFF: Cancels.
ATP SEEK	ON*: Automatically searches for a station with better reception when the traffic information's reception is
	poor. ; OFF: Cancels.

[PTY SEARCH/ NEWS SET/ AF SET/ RDS REGIONAL/ RDS REG/ AUTO TP SEEK/ ATP SEEK] is selectable only for KDC-4051UM.

[PTY SEARCH] is selectable only when the source is “FM.”

[NEWS SET/ AF SET/ RDS REGIONAL/ RDS REG/ ATP SEEK] is selectable only when the source is “FM.” If other playback source is selected, these settings are selectable under [RDS SET] item. (page 14)