4
GETTING STARTED
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: “CANCEL” \ “DEMO” \ “PRESS” \ “VOLUME” \ “KNOB”
1 Press the volume knob.

[<Y>/N]
is selected for the initial setup.
2 Press the volume knob again.
“DEMO OFF” appears.
Set the clock
1 Press the volume knob to enter
[FUNCTION]
.
2 Turn the volume knob to select
[SETTINGS]
, then press the knob.
3 Turn the volume knob to select
[CLOCK]
, then press the knob.
4 Press the volume knob to select
[CLK ADJ]
.
5 Turn the volume knob to adjust the hour, then press the knob.
6 Turn the volume knob to adjust the minute, then press the knob.
Press 4

/

¢ to move between the hour and minute adjustment.
7 Press and hold to exit.
(or)
Press and hold SCRL DISP to enter clock adjustment mode directly
while in clock display screen.

Then, perform steps 5 and 6 above to set the clock.

1
2
Set the initial settings
1 Press SRC to enter
[STANDBY]
.
2 Press the volume knob to enter
[FUNCTION]
.
3 Turn the volume knob to select
[INITIAL]
, then press the knob.
4 Turn the volume knob to make a selection (see the table below), then press
the knob.
5 Press and hold to exit.
• To return to the previous hierarchy, press .
Default:
XX
PRESET
TYPE NML: Memorizes one station for each preset button in each band (FM1/ FM2/ FM3/
MW/ LW/ SW1/ SW2). ; TYPE MIX: Memorizes one station for each preset button regardless
of the selected band.
KEY BEEP
BEEP ON: Activates the keypress tone. ; BEEP OFF: Deactivates.
TDF-ALARM
ALRM ON: Activates the alarm if you forgot to detach the faceplate when ACC is set to OFF. ;
ALRM OFF: Deactivates.
RUSSIAN
RUS ON: Folder name, file name, song title, artist name, album name are displayed in
Russian (if applicable). ; RUS OFF: Cancels.
OFF WAIT
Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turns off (while in standby mode) to save
the battery.
OFF ––– : Cancels ; OFF 20M: 20 minutes ; OFF 40M: 40 minutes ; OFF 60M: 60 minutes
AUX SET
AUX ON: Enables AUX in source selection. ; AUX OFF: Disables. (➜ 8)
CD READ
CD READ 1: Automatically distinguishes between audio file disc and music CD. ;
CD READ 2: Forces to play as a music CD. No sound can be heard if an audio file disc is played.
SWPRE
(Except for
KDC-U456
)
SWPRE R/ SWPRE SW: Selects whether rear speakers or a subwoofer are connected to the
line out terminals on the rear (through an external amplifier).
SPEAKER
SP OFF/ SP 5/4/ SP 6 × 9/6/ SP OEM: Selects according to the speaker size (5 inches or
4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.
F/W UP
F/W xx.xx
<Y>/N: Starts upgrading the firmware. ; Y/<N>: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
•
[TDF-ALARM]
is selectable only for
KDC-U456
/
KDC-U356
/
KDC-U3056
.
•
[RUSSIAN]
and
[OFF WAIT]
is selectable only for
KDC-3257UGM
/
KDC-3357URM
/
KDC-3157UAM
.
3
EN_KDC-U456[MWM0M20]1.indd 4EN_KDC-U456[MWM0M20]1.indd 4 8/14/12 5:48:45 PM8/14/12 5:48:45 PM