9
ENGLISH |
AUDIO SETTINGS
While listening to any source...
1 Press AUDIO to select
[AUD CTRL]
.
2 Turn the volume knob to make a selection (see the table below), then press
the knob.
Repeat step 2 until the desired item is selected or activated.
3 Press and hold to exit.
• To return to the previous hierarchy, press .
Default: For
KDC-U456
/
KDC-U356
/
KDC-U3056
/
KDC-3257UGM
/
KDC-3357URM
/
KDC-3157UAM
:
XX
For
KDC-U456
/
KDC-U356
/
KDC-U3056
:
XX
*1
For
KDC-3257UGM
/
KDC-3357URM
/
KDC-3157UAM
:
XX
*2
SW LEVEL –15 to +15 (0): Adjusts the subwoofer output level.
BASS LVL –8 to +8 (+8
*1/
0
*2
): Adjusts the level to memorize for each source.
(Before making an adjustment, select the source you
want to adjust.)
MID LVL –8 to +8 (+2
*1/
0
*2
):
TRE LVL –8 to +8 (+3
*1/
0
*2
):
EQ PRO
BASS ADJ BASS FRQ 60/ 80/ 100/ 200: Selects the center frequency.
BASS LVL –8 to +8
(+8*1/ 0*2)
: Adjusts the level.
BASS Q
1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.
BASS EXT B-EX ON
*1
: Turns on the extended bass. ;
B-EX OFF
*2
: Cancels.
MID ADJ MID FRQ 0.5K/ 1.0K
*2
/ 1.5K/ 2.5K
*1
: Selects the center
frequency.
MID LVL –8 to +8 (+2
*1/
0
*2
): Adjusts the level.
MID Q 0.75/ 1.00/ 1.25: Adjusts the quality factor.
TRE ADJ TRE FRQ 10.0K/ 12.5K/ 15.0K/ 17.5K: Selects the center
frequency.
TRE LVL –8 to +8 (+3
*1/
0
*2
): Adjusts the level.
EQ NATURAL
*2
/ USER/ ROCK/ POPS/ EASY/ TOP40/ JAZZ/ POWERFUL
*1
:
Selects a preset equalizer suitable to the music genre. (Select [USER] to use the
customized bass, middle, and treble settings.)
B. BOOST BB-L LV1
*1
/
BB-L
LV2/
BB-L
LV3: Selects your preferred bass boost
level. ; BB-L OFF
*2
: Cancels.
LOUDNESS LOUD LV1
*2
/ LOUD LV2: Selects your preferred low and high
frequencies boost to produce a well-balanced sound at a low volume
level. ; OFF
*1
: Cancels.
BALANCE L15 to R15 (0): Adjusts the left and right speaker output balance.
FADER R15 to F15 (0): Adjusts the rear and front speaker output balance.
SW SET SW ON: Turns on the subwoofer output. ; SW OFF: Cancels.
DTIL SET
HPF For
KDC-U456
:
HPF THRU
: All signals are sent to the speakers. ; HPF 100HZ/
HPF 120HZ/ HPF 150HZ: Audio signals with frequencies higher than
100 Hz/ 120 Hz/ 150 Hz are sent to the speakers.
LPF SW
LPF THRU
: All signals are sent to the subwoofer. ; LPF 85HZ/
LPF 120HZ/ LPF 160HZ: Audio signals with frequencies lower than 85
Hz/ 120 Hz/ 160 Hz are sent to the subwoofer.
SW PHASE PHAS REV (180°)/ PHAS NML (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [LPF THRU] is selected for
[LPF SW].)
SPRM SET SPRM ON: Creates realistic sound by interpolating the high-frequency
components that are lost in AAC/MP3/WMA audio compression. ;
SPRM OFF: Cancels. (Selectable only when playing back an AAC/MP3/
WMA disc or a USB device, except iPhone/iPod.)
V-OFFSET
(Default : 0)
–8 to +8 (for AUX) ; –8 to 0 (for other sources): Presets the volume
adjustment level of each source. (Before adjustment, select the source
you want to adjust.)
Except for
KDC-U456
:
•
[SW LEVEL]
/
[SW SET]
/
[LPF SW]
/
[SW PHASE]
is selectable only if
[SWPRE]
is set to
[SWPRE SW]
. (➜
4
)
•
[SW LEVEL]
/
[LPF SW]
/
[SW PHASE]
is selectable only if
[SW SET]
is set to
[SW ON]
.
EN_KDC-U456[MWM0M20]1.indd 9EN_KDC-U456[MWM0M20]1.indd 9 8/14/12 5:48:59 PM8/14/12 5:48:59 PM