Preparations
Release Control knob (Volume knob)
[DISP]
Exit Demonstration Mode
Turn off the demonstration mode when you use it for the first time after installation.
Press the Control knob to quit the demonstration mode when the messages “To Cancel DEMO Press the volume knob” are displayed (approx. 15 seconds).
Turn the Control knob and press it when the “YES” is displayed.
The demonstration mode can also be canceled in the Function setting mode. Refer to <Demonstration mode Setting> (page 34) of Instruction manual
Adjusting the Clock
Press the [DISP] button several times to display the clock.
Press the [DISP] button for at least 1 second.
Turn the Control knob to adjust the hour, and then press the Control knob.
Turn the Control knob to adjust the minute, and then press the Control knob.
4 Quick Start Guide
Detaching/ Reattaching the Faceplate
Press the Release button.
¤
•Remove the faceplate at once after pressing the Release button; otherwise it can fall down due to vibration.
•The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.
•Keep the faceplate in its faceplate case while detached.
•Do not place the faceplate (and the faceplate case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.