NOTE

You can enter up to 10 characters for each name.

6Press either the NAME.S button on the main unit or the OK button on the remote.

The disc name is stored and the disc name preset mode is canceled.

If you make no entry in a 10-second period, the name will be stored with the characters input so far.

NOTE

•The number of characters and discs whose names can be stored will differ depending on the disc changer that is connected. Please see your disc changer manual for details.

•Discs are identified by their total length and number of tracks. If another disc happens to have the same specifications as one that you have already stored a name for, the name will be displayed for it, too.

•If you want to change the name of a disc, repeat steps 1 and 2 to display the name, and then repeat steps 3 and 4 to input the changes.

•Pressing the reset button does not erase the disc names stored in a disc changer.

Disc Name Preset Play (DNPP)

(Function of Remote)

If you have preset the name of a disc that you want to listen to in the disc changer, you can look for it by name and start playing it.

1Press the DNPP button on the remote.

"DNPP" will appear in the display, and the disc name preset play mode is entered.

The preset names/disc titles of the disc in the disc changer to which you are currently listening are successively displayed for five seconds each.

In any of the units that are connected, discs that have not been disc name preset will display "NO NAME" .

NOTE

•This function can only be used in disc changers that were manufactured or sold as of 1997. Also note that some units cannot provide a display unless the disc name preset has been made by the unit that is playing.

•Discs in the disc changer that have never been played before will appear as "NO ACCESS" when the disc names are displayed. When you cannot identify a disc because of the "NO ACCESS" display after inserting a disc magazine, try playing it using the disc scan or a similar function to display the disc name. Also note that "NO DISC" will be displayed when a disc has not been loaded.

Rapid display (forward / reverse):

Press the DISC+ or DISC– button.

Pressing the DISC+ button will rapidly display the preset names/disc titles in order.

Pressing the DISC– button will rapidly display the preset names/disc titles in reverse order.

2When the name appears for the disc you want to play Press the OK button.

The disc whose name is displayed will be recalled, and the disc name preset play (DNPP) mode will end.

To cancel DNPP mode: Press the DNPP button.

The disc name preset play (DNPP) mode will be canceled.

— 29 —