Selectable Illumination
You can switch the color of the button illumination between green and red.
Display and setting:
"Color Green" : The color of the illumination is green.
"Color Red" : The color of the illumination is red.
Brightness level adjustment
You can adjust the brightness level of the unit separately when your car's light switch has been turned on or off.
Display and setting: "Bright 0" – "Bright 10"
NOTE
The initial setting value while your car's light switch is turned on is "5" , and while the light is turned off is "10" .
Display and setting:
"Graphic ON" : The graphic display works.
"Graphic OFF" : The graphic display does not work.
Black Mask
This function allows you to turn off the lower part of the display if there is too much information in the display.
Display and setting:
"BLACK MASK ON" : The display will be shown in horizontally divided mode. When this function is enabled, the dual display mode is entered and
"BLACK MASK OFF" : The display will turn on by using the whole part of the display.
NOTE
This function cannot be set in the
Dimmer
You can dim the display.
NOTE
The dimmer function is not available for units if the dimmer wire is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on.
"Dimmer OFF" : The dimmer setting is off.
Switching Graphic Display
You can turn the movement of graphic display on and off. The initial setting is ON.
Time setting for removing the faceplate
You can set the interval during which the open control panel cannot reverse to be hidden. During the period you have set, the faceplate can be removed from the faceplate bracket.
Display and setting:
"OFF WAIT" : 0sec / 3sec / 5sec / 10sec / 15sec / 20sec / 25sec (sec=sec.)
NOTE
If you do not slide the faceplate lock switch during the period which you have set, the unit’s power turns off after the control panel is automatically hidden.
— 37 —