Kenwood KDC-X915 manual 44

Connecting Wires to Terminals

English

2WARNING

If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.

2CAUTION

When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). For example, if you connect the + connector of the left speaker to a front output terminal, do not connect the -connector to a rear output terminal.

Rear right output (Red) Rear left output (White)

Non-fading right output (Red) (KDC-X915/X815 only)

Non-fading left output (White) (KDC-X915/X815 only)

Front right output (Red) Front left output (White)

FM/AM antenna input

NON FRONT FADING REAR

DC/DC converter box (Wrap the cushion (Accessory!) around this box.)

2CAUTION

Separate this box from the unit and antenna cords. If they are too close, it may cause the reception to get noise.

KENWOOD disc changer /

DAB control input /

Display Data Output Jack

Outputs data representing the unit's current state, causing it to appear in the external display.To connect to this jack, a converting adapter (optional) is necessary.

	Wiring harness
If no connections are made, do not let the wire come out from the tab.	(Accessory1)

NOTE

To connect the Disc changer or

DAB unit, consult each manual.

When using the optional power amplifier, connect to its power control terminal.

Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the film-type antenna.

To car light control switch

To "EXT.AMP.CONT." terminal of the amplifier having the external amp control function.

Ignition key switch

Car fuse box

(Main fuse)

Battery + –

P.CONT Power control wire (Blue/White)

ANT.

CONT Motor antenna control wire (Blue)

ILLUMI	Dimmer control wire (Orange / White)
EXT.CONT External amplifier control wire
	(Pink / Black) (KDC-X915/X815 only)
	ACC
	Car fuse box	Ignition wire (Red)
		Battery wire (Yellow)
	Ground wire (Black) - (To car chassis)

Fuse	(5A:KDC-X915)
	(10A:KDC-X815/9015)
White/Black
		To front left speaker
FRONT • L	+	(KDC-X815/9015 only)
	White
Gray/Black		To front right speaker
FRONT • R	+	(KDC-X815/9015 only)
	Gray
Green/Black
		To rear left speaker
REAR • L	+	(KDC-X815/9015 only)
	Green
Purple/Black
		To rear right speaker
REAR • R	+	(KDC-X815/9015 only)
	Purple

— 44 —