Whirlpool TER56W2B important safety instructions Setting the clock, Control knobs, Command pads

Control knobs

There are two control knobs: the Oven Selector and the Oven Temperature Control Knob. The Oven Selector tells the oven which mode you wish to cook in (Bake, Broil, Time Bake), while the Oven Temperature Control Knob lets you set a specific cooking temperature. When using the MEALTIMER’” control you will use these knobs along with command pads (see “Using the electronic MEALTIMER’” control” on page 18).

Command pads

The command pads tell the oven what to do and in what order. A few examples:

-Clock Set tells the oven you are going to set the clock.

-Cancel/Off tells the oven or Minute Timer to turn off.

Each command pad (except Cancel/Off and StarVEnter) has its own Indicator Light. The Indicator Light comes on when you touch the command pad.

Setting the clock

1.Push the Clock Set pad. The colon flashes and the previously set time of day will light up in the display.

2.Use the Hour and Minute pads to set the time of day. Push the “up”or “down” pad(s) until the correct time shows in the display.

3.Push the Start/Enter pad.

NOTE: If you do not want the clock time displayed, push and hold the Clock Set pad for 4 seconds. To display the clock time again, push the Clock Set pad once, then reset the clock time if necessary.

12