5.Use the Hour and Minute pads to set the desired start time. Push the “up”or “down” pad(s) until the correct time shows in the display.
This example shows a desired start time of 2 o’clock.
6.Push the Stop Time pad. The time of day with the colon flashing will show in the display, the Stop Time Indicator Light will light up, and the Start Time Indicator Light will flash.
7.Use the Hour and Minute pads to set the desired stop time. Push the “up”or “down” pad(s) until the correct time shows in the display.
This example shows a desired stop time of 2:30. This provides a cook time of 30 minutes (the difference between the start and stop times).
NOTE: If you do not set a stop time within 5 minutes, the display will return to the time of day.
8.Push the Start/Enter pad. The Delay Indicator Light will light up in the display to indicate that the oven is programmed to start at a later time. The Start Time and Stop Time Indicator Lights will flash.
NOTE: You can change a time setting after pushing the Start/Enter pad by repeating just Steps 4 and 5 or 6 and 7.
24
STtiRT STOP TIME TIME
START STbP
TIME TIME
