Removing the Unit
■ Removing the hard rubber frame
English | Insert the removal tool into the indentations in the hard rubber | |
frame, and pull it gently until the lock is released. | ||
|
Accessory0
Removal tool
■Removing the Unit
1Make the faceplate control panel appear.
2Refer to the section “Removing the hard rubber frame” and then remove the hard rubber frame.
3Remove the hex head machine screw with washer (M4⋅8) on the back panel.
4Insert the removal tool deeply, as illustrated, with the L on the left and the R on the right.
Accessory4
|
| L | Accessory3 |
|
|
| Removal tool |
NOTE |
|
| |
If the unit is removed while |
|
| |
the faceplate is closed, use |
|
| |
the removal tool with the left |
|
| |
and right reversed, as |
|
| |
illustrated. |
| R | |
5 | Push upward the both |
|
|
| tools, as shown, and pull |
|
|
| the unit toward you until it |
|
|
| is halfway out. The unit |
|
|
| may drop if you pull it out |
| L |
| completely. |
|
|
6 | Pull the unit all the way out |
|
|
| with your hands, being |
|
|
| careful not to drop it. |
|
|
|
|
| L |
— 46 —