Clock and Other Functions
Initial SettingsYou can select following Initial Setting items.
1Select the StandbyPressing the [SRC] button repeatedly switches source.
Select the “STANDBY” display.
✍✍SRC Select mode 2: Press the [SRC] button and then turn the [VOL] knob. To determine the selected source, press the [VOL] knob.
2Enter Menu List mode Press the [MENU] button.
3Enter Initial Setting modeTurn the [VOL] knob and press it when the desired item is displayed.
Select “Initial Settings”.4Select the setting item to adjust Turn the [VOL] knob.Display | Overview | |
“Initial Settings” |
| |
| “SRC Select” | Sets the source selection method. |
|
| “Settings 1”/ “2” |
| “Beep” | Setting the operation check sound (beep sound) |
|
| ON/OFF. |
|
| “OFF”/ “ON” |
| “Menu Language” | You can select the display language for the |
|
| Menu list item. |
|
| “English”/ “Français”/ “Español” |
| “Pandora Source” | When this is set to ON, Pandora source can be |
|
| selected. |
|
| “ON”: Allows you to select Pandora source by |
|
| connecting an iPhone, iPod touch, Android or |
|
| BlackBerry (with the Pandora® internet radio |
|
| application). |
|
| “OFF”: Disable Pandora source selection. |
| “Built in AUX” | When this is set to ON, AUX source can be |
|
| selected. |
|
| “ON”: Allows AUX source to be selected. Use |
|
| this setting when the |
|
| is connected to the external equipment all |
|
| the time. |
|
| “OFF”: Disable AUX source selection. Use this |
|
| setting when the |
|
| not used. |
| “Forced | Sets the method for reading CD. |
|
| “Settings 1”: Automatically distinguishes |
|
| between audio file disc and music CD when |
|
| playing disc. |
|
| “Settings 2”: Forces playing as music CD. |
| “Built in AMP” | Selecting “OFF” turns off the |
|
| Turning off the |
|
| quality of the sound from Preout. |
|
| “OFF”/ “ON” |
43
| “DSI” | DSI (Disabled System Indicator) of the unit blinks | ||
|
| when the faceplate is removed. | ||
|
| “OFF”/ “ON” |
| |
| “F/W Update” | Updates the firmware. The update information | ||
|
| will be posted on the following URL as | ||
|
| necessary. |
| |
|
| www.kenwood.com/cs/ce/ |
| |
|
| ( |
| : Factory setting) |
5Make a setting
Turn the [VOL] knob to select a setting value, and then press the [VOL] knob.
6Exit Menu List mode
Press the [MENU] button for at least 1 second, and then press it again briefly.
Demonstration mode SettingTurning the demonstration mode ON/OFF.
1Enter Menu List mode Press the [MENU] button.
2Enter Demonstration mode settingTurn the [VOL] knob and press it when the desired item is displayed.
Select “DEMO Mode”.3Set the Demonstration modeTurn the [VOL] knob and press it when the desired item is displayed.
Select “ON” or “OFF”.4Exit Menu List mode Press the [MENU] button.
The faceplate of the unit can be detached and taken with you, helping to deter theft.
Removing the Faceplate1Press the Release button. Drop open the faceplate.
2Drawing the faceplate to left side pull it to forward and remove it.¤
•The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.
•Keep the faceplate in its faceplate case while detached.
•Do not expose the faceplate (and the faceplate case) to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
Reattaching the Faceplate1Align the shaft on the unit with the depression on the faceplate.2Push the faceplate in until it clicks.The faceplate is locked in place, allowing you to use the unit.
English 44