Audio Adjustments
Manual Equalizer ControlYou can adjust following Equalizer Control items.
Band | Item | Range |
5 | Make a setting |
| Turn the [VOL] knob to select a setting value, |
| and then press the [VOL] knob. |
6 | Exit Audio Control mode |
| Press the [MENU] button for at least 1 second. |
Main source and sub source (Auxiliary input) output Front channel and Rear channel separately.
DisplayOverview“BAND1” (62.5 Hz) | “GAIN” Band level | |
| “B.Ex” Bass Effect | “ON”/ “OFF” |
“BAND2” (100 Hz) | “GAIN” Band level | |
“BAND3” (160 Hz) | “GAIN” Band level | |
“BAND4” (250 Hz) | “GAIN” Band level | |
“BAND5” (400 Hz) | “GAIN” Band level | |
“BAND6” (630 Hz) | “GAIN” Band level |
⁄
•When “iPod” is selected in the section <Preset Equalizer curve Select> (page 46), Manual Equalizer Control is disabled.
•You can select for each source.
“2 Zone”
“2 Zone Rear Volume”*
“2 Zone Select”*
Sets the Dual Zone System. “OFF”/ “ON”
Adjust the volume of Rear channel. “0” — “35”
Specifies the destination of sub source sound
when the Dual Zone function is turned on. “Rear”/ “Front”
“BAND7” (1 kHz) | “GAIN” Band level |
|
| |
“BAND8” (1.6 kHz) | “GAIN” Band level |
|
| |
“BAND9” (2.5 kHz) | “GAIN” Band level |
|
| |
“BAND10” (4 kHz) | “GAIN” Band level |
|
| |
“BAND11” (6.3 kHz) | “GAIN” Band level |
|
| |
“BAND12” (10 kHz) | “GAIN” Band level |
|
| |
“BAND13” (16kHz) | “GAIN” Band level |
|
| |
“BAND1” – “BAND13” | “Q” Quality | 1.35/ 1.5/ 2.0 | ||
| ( |
| : Factory setting) | |
|
|
|
| |
Band | Item |
|
| Range |
“BAND1” (62.5 Hz) | “GAIN” Band level |
|
| |
| “B.Ex” Bass Effect |
|
| “ON”/ “OFF” |
“BAND2” (160 Hz) | “GAIN” Band level |
|
| |
“BAND3” (400 Hz) | “GAIN” Band level |
|
| |
“BAND4” (1 kHz) | “GAIN” Band level |
|
| |
“BAND5” (2.5 kHz) | “GAIN” Band level |
|
| |
“BAND6” (6.3 kHz) | “GAIN” Band level |
|
| |
“BAND7” (16 kHz) | “GAIN” Band level |
|
| |
| ( |
| : Factory setting) |
1Select the source
Pressing the [SRC] button repeatedly switches source.
Select a source other than “STANDBY”.
✍✍SRC Select mode 2: Press the [SRC] button and then turn the [VOL] knob. To determine the selected source, press the [VOL] knob.
2Enter Audio Control mode Press the [VOL] knob.
3Enter Manual Equalizer Control mode Turn the [VOL] knob and press it when the desired item is displayed.
Select “Manual Equalizer”.4Select the setting item to adjust
Turn the [VOL] knob and press it when the desired item is displayed.
47
* The Dual Zone System is set to “ON”.
( |
| : Factory setting) |
1Select the source
Pressing the [SRC] button repeatedly switches source.
Select a source other than “STANDBY”.
✍✍SRC Select mode 2: Press the [SRC] button and then turn the [VOL] knob. To determine the selected source, press the [VOL] knob.
2Enter Audio Control mode Press the [VOL] knob.
3Turn the [VOL] knob and press it when the desired item is displayed.
Select “Pro Setup” > “Zone Control”.4Select the item you want to setTurn the [VOL] knob and press it when the desired item is displayed.
5Exit Audio Control mode
Press the [MENU] button for at least 1 second.
⁄
•Select Main source by [SRC] button.
•Adjust the volume of Front channel by [VOL] knob.
•The Audio Control has no effect on sub source.
•There are following limitations when Dual Zone System is enabled.
-There is no output from the subwoofer.
-“Fader”, “Subwoofer Level” of <Audio Control> (page 45) and DSP function are not available.
English 48