Maintenance

[Clean air filter]

NOTE When having to clean, don't dismantle air-filter,otherwise may cause faults. In the environment where there is too much dust, air filter should be cleaned for more times.

(about half a year one time)

(B)Wash with water.

With too much dust, use soft brush and neutral

detergent.

Swing off the water, and then place in cool place.

1. Open inlet grill

Press the elliptical "PUSH" knob, the inlet grill will automatically drop. (the inlet grill is catched with two pothooks)

Press the elliptical knob

PUSHthe inlet grill will automatically drop

5.Install air filter

(1)Put filter into protruding parts at the top of the inlet grill.

(2)Connect the two pothooks with inlet grill See 2

Open two

Pothook

 

pothooks

 

2.Open two othooks

3.Dismantle air filter

 

Drag the knob of

 

the grill back lift

Air filter

the filter and take

down.

 

4. Clean

CAUTION!

(A) Remove dust with vacuum filter.

Connet the two pothooks with inlet grill

6.Close inlet grill See 1.

7.Press the filter signal return key on the

controller. '' ''

[Clean inlet grill]

1. Open inlet grill

Press the elliptical "PUSH" knob, the inlet grill will automatically drop. (the inlet grill is catched with two pothooks)

Press the elliptical knob

PUSHthe inlet grill will automatically drop

Open two

Pothook

 

pothooks

 

7

Page 9
Image 9
Haier HBU-18CF03, HBU-18HF03 installation manual Maintenance, Clean air filter, Clean inlet grill