Haier HBU-18HF03 Clean outlet and shell, Dismantle and install swing plate, Install inlet grill

Models: HBU-18CF03 HBU-18HF03

1 24
Download 24 pages 47.6 Kb
Page 10
Image 10
2.Take off airfilter

Install inlet grillInstall air filter Maintenance

2.Take off airfilter

3.Take of inlet grill

4. Clean

CAUTION!

NOTE

When the filter too much dust

To spray the special detergent for vent fan or utensils.

5.

Install inlet grill

see 3

6.

Install air filter

see "Clean air filter"

7.

Close inlet grill

see 1

[Clean outlet and shell]

CAUTION!

Close inlet grill Don't use gasoline, benzene, dilutant, polishing powder, or liquid inseticide.

[Dismantle and install swing plate ]

1.Fix the swing plate at the bottom.

2.Dismantle the swing plate.

CAUTION!

[Clean outlet and shell] Use water to clean the plate and don't heavily scrub, otherwise the fine hair may fall off. Unscrew the screw at both ends of the swing plate.

[Dismantle and install swing plate ]

3. Install swing plate

Lightly rotate swing plate to insert the ridge at both ends of the outlet into the groove and then screw up.

8

Page 10
Image 10
Haier HBU-18HF03 Clean outlet and shell, Dismantle and install swing plate, Take off airfilter 3.Take of inlet grill