Maintenance

How to clean the unit

If the control panel is stained, wipe it with a dry soft cloth such as a silicon cloth.

If it is badly stained, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth.

•Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the control panel with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters.

How to clean the connectors

Frequent detachment will deteriorate the connectors.

To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.

Connectors

How to handle discsWhen removing a disc from Center holder

its case, press down the center holder of the case and lift the disc out, holding it by the edges.

•Always hold the disc by the edges. Do not touch its recording surface.

When storing a disc in its case, gently insert the disc around the center holder (with the printed surface facing up).

• Make sure to store discs in cases after use.

To keep discs clean

A dirty disc may not play correctly. If a disc does become dirty, wipe it with a soft cloth in a straight line from center to edge.

•Do not use any solvents (for

example, conventional record cleaner, spray, thinner, benzine, etc.) to clean discs.

To play new discs

New discs may have some rough spots around the inner and outer edges. If such a disc is used, this unit may reject the

disc.

To remove these rough spots, rub the edges with a pencil or ball-point pen, etc.

Do not use the following discs:

Single CD (8 cm disc)

Warped disc

 

 

Sticker and sticker

Stick-on label

residue

 

 

 

 

C-thru Disc

Unusual shape

(semitransparent

 

disc)

 

 

Transparent or

 

semitransparent

 

parts on its recording

 

area

 

 

 

26ENGLISH