Listening to the radio
~
]“TUNER”
Ÿ
]“F1,” “F2,” “F3,” or “AM”
!
“ST” lights up when receiving an FM stereo broadcast with sufficient signal strength.
You can select or set the <TUNER CTRL> settings while listening to the radio.
1
2
Enter Function Control settings.
Select “TUNER CTRL.”
3
4
Turn the control knob to make a selection, then press to confirm.
See table below for selection.
Finish the procedure.
[Hold]
Item |
| Selectable setting, [ Initial ] |
|
| |
SEEK MODE | Selects the tuning mode for 4 / ¢ buttons. | |
Tuning mode | • AUTO1 | : Automatically search for a station. |
| • AUTO2 | : Search in order of the stations in the preset memory. |
| • MANU | : Manually search for station. |
| You can preset up to 6 stations for each FM and AM band. | |
Automatic | • START*1 | : Automatically search for stations and stored in to the memory. |
presetting |
| |
| • CANCEL | : Returns to item selection menu. |
CRSC SET*2 | • ON*3 | : Improve the FM reception, (but the stereo effect may be lost). |
Clear Reception | • OFF | : Cancels. The stereo effect may be restored automatically |
Stereo Control |
| (depending on the reception condition). |
setting |
|
|
*1 All previously stored stations are erased and stations are stored anew. The station stored in the lowest preset number will be automatically tuned in.
*2 Displayed only when the source is “TUNER (F1 / F2 / F3).”
*3 Strong electrical fields (such as from power lines) may cause unstable sound quality when <CRSC SET> is set to <ON>. In such situation, set to <OFF>.
ENGLISH 9