Manuals / Brands / Car Audio and Video / Car Video System / Kenwood / Car Audio and Video / Car Video System

Kenwood KDV-MP3346, KDV-MP3346M Preparation, ˆSetting the clock, 1Turn on the power, 2Enter Function Control settings, 4Finish the procedure, 1 Turn on the power, 4Adjust the hour

1 29

Download 29 pages, 957.03 Kb

Preparation

The display demonstration is always turned on unless you cancel it.

When you turn on the power (or after you reset the unit), the display shows:

“CANCEL” = “DEMO” = “PRESS” =

“VOL KNOB”

•If no operation is done for about 15 seconds, “DEMO START” appears and the display demonstration starts.

To cancel the display demonstration:

1Press the control knob.

“NO/<YES>” is shown on the display.

2Press the control knob again to select “YES”.

“DEMO OFF” appears on the display.

•If “NO” is selected, “DEMO START” appears and the display demonstration starts.

You can also cancel the display demonstration from the Function Control settings, see the following:

Canceling the display demonstration

1Turn on the power.

2Enter Function Control settings.

3Turn the control knob to make a selection, then press to confirm.

4Finish the procedure.

[Hold]

Setting the clock

1 Turn on the power.

2Enter Function Control settings.

3Turn the control knob to make a selection, then press to confirm.

1 : 00

4Adjust the hour.

4ENGLISH

Contents

Declaration of Conformity with regard to the EMC Directive 2004/108/EC WARNINGS (to prevent injury or fire): Important to know How to attach/detach the control panel How to reset your unit How to read this manual CONTENTS 4Preparation 7Basic operations 9Listening to the radio 11Playable disc type Preparation 1Turn on the power 2Enter Function Control settings 4Finish the procedure ˆSetting the clock ˆOther settings before operations 1Turn the unit to standby state 3Select “INIT SETUP.” ˆPrepare the remote Item Selectable setting, [ Initial] Initial KEY BEEP • OFF Basic operations ˆ Control panel ˆRemote controller (RC-DV350) Main unit Remote General operation controller Listening to the radio Select “TUNER CTRL.” Manual presetting (FM/AM) Changing the frequency step Changing the display information Selecting a preset station Using the remote controller Playable disc type Listening to a disc ˆOperation using the control panel Ejects the disc SRC Pauses or resumes playback Stops playback ˆOperation using the remote controller Pauses or resumes playback Searches for a chapter/track/file Selects a title/program/playlist/folder Reverses/fast-forwards “⋅2, ⋅5, ⋅10, ⋅20, ⋅60” “1, 2, 3” During pause: Forward frame-by-frameplayback Skip back or forward the scenes by about five minutes*2 Direct Search CHAP PRGM PLST NUMBER PBC (playback control) Menu To cancel the PBC playback DIRECT ENTER On-screenbar operations Control screen operations To select a playback mode OSD “REPEAT” “RANDOM” Disc setup menu operations SETUP Menu Setting LANGUAGE AUDIO SUBTITLE Listening to the other external components Turn on the connected component and start playing the source ⁄Adjust the sound as you want. ( 22, 23) Other adjustments 1 Enter Function Control settings 2Select “AUD CTRL,” “DISP CTRL,” or “AUD SETUP.” –8— +8, [0] MID LEVEL *2 TRE LEVEL *2 BALANCE L15 — R15 Troubleshooting Remedy/Cause Maintenance Language codes Specifications