Kenwood KDW4TTSL owner manual Common Dishwashing Problems and Solutions

COMMON DISHWASHING PROBLEMS AND SOLUTIONS

PROBLEM	POSSIBLE CAUSE	POSSIBLE SOLUTION
Dishwasher will not start	* Dishwasher not receiving	* Check electrical connection
	Electrical power.	Fuse/circuit breaker.
	* Door is unlatched.	* Close and latch door.
	* Dishwasher not level.	* Level unit.
Dishes not clean	* Improper loading	* Arrange dishes so spray action
		reaches all surfaces.
		* Do not overload dishwasher.
	* Spray arm not rotating freely	* Check spray arm to make sure
		nothing (i.e. cutlery) is
		obstructing spray arm rotation.
		* Check if filter screen has become
		dislodged and obstructing spray
		arm rotation.

*Not enough detergent and/or improper detergent being used.

*Improperly prepared dishes.

*Use more dishwasher detergent

*Do not use detergent that is old or lumpy.

*Use only a recommended dishwasher detergent.

*Excess food soil and liquids should be removed from dishes before loading.

	* Water inlet hose kinked/bent	* Eliminate kink or bend from
	due to improper installation.	Inlet hose.
	*The filter lose its position	* Assure the filter in its right position
Chipping or breaking	* Improper loading of dishes.	* Do not overload dish rack. Load
glassware		glasses on the bottom rack only,
Water remains in bottom	* A small amount of water	* This is necessary to keep the
	(in sump area) is normal.	pump primed and is drained
		automatically at the beginning
		of each cycle.

*Excessive amount of water; cycle not completed.

*Allow dishwasher to complete full cycle.

This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste.

There are separate collection systems for recycling in the EU.

For more information, please contact the local authority or your retailer where you purchased the product.

9