•If the fuse blows, first make sure the wires aren’t touching to cause a short circuit, then replace the old fuse with one with the same rating.
•Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the - wires or ground them to any metal part in the car.
•After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly.
About CD players/disc changers connected to this unit
If the CD player/ disc changer has the
The functions you can use and the information that can be displayed may differ depending on the models being connected.
Connecting the ISO Connector
The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit.
The default connection for the wiring harness is described in 1 below. If the ISO connector pins are set as described in 2, make the connection as illustrated.
Please be sure to reconnect the cable as shown 2 below to install this unit to the Volkswagen vehicles etc.
1(Default setting) The
vehicle’s ISO connector is linked with the ignition, and the
Ignition cable | |
(Red) | (Red) |
Unit | Vehicle |
Battery cable | |
(Yellow) | (Yellow) |
2The
Ignition cable | |
(Red) | (Red) |
Unit | Vehicle |
Battery cable | |
(Yellow) | (Yellow) |
English 11