Kenwood KIV-BT900, KIV700 Display, Overview, Make a setting, 5Make a setting, Hang up the phone, Select “DEMO Mode”, When the call ends, Exit Menu List mode, Exit Menu List mode

3Enter Initial Setting mode

Turn the [Volume] knob and press it when the desired item is displayed.

Select “Initial Settings”.

4Select the setting item to adjust

Turn the [Volume] knob and press it when the desired item is displayed.

Display		Overview
“Initial Settings”
	“Source Select”	Sets the source selection method.
		“1”/ “2”
	“Beep”	Setting the operation check sound (beep sound)
		ON/OFF.
		“ON”/ “OFF”
	“Menu Language	You can select the display language for the
	Select”	Menu list item.
		“English”/ “Français”/ “Español”
	“Built in AUX”	When this is set to ON, AUX source can be
		selected.
		“ON”: Allows AUX source to be selected. Use
		this setting when the built-in AUX terminal
		is connected to the external equipment all
		the time.
		“OFF”: Disable AUX source selection. Use this
		setting when the built-in AUX terminal is
		not used.
	“Favorite Delete”	Deletes Favorite Preset Memory.
		Refer to <Favorite Preset Memory Delete>
		(page 49).
	“Built in AMP”	Selecting “OFF” turns off the built-in amplifier.
		Turning off the built-in amplifier improves the
		quality of the sound from Preout.
		“ON”/ “OFF”
	“AV Out Set”	Changes the iPod setting from AV Output to
		output-only terminal.
		“ON”/ “OFF”
	“System F/W	Updates the firmware. The update information
	Update”	will be posted on the following URL as
		necessary.
		www.kenwood.com/cs/ce/
		(	: Factory setting)

5Make a setting

Turn the [Volume] knob to select a setting value, and then press the [Volume] knob.

6Exit Menu List mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

Demonstration Mode Setting

Turning the demonstration mode ON/OFF.

1Enter Menu List mode Press the [MENU] button.

2Enter Demonstration mode setting

Turn the [Volume] knob and press it when the desired item is displayed.

Select “DEMO Mode”.3Set the Demonstration mode

Turn the [Volume] knob and press it when the desired item is displayed.

Select “ON” or “OFF”.

4Exit Menu List mode

Press the [MENU] button for at least 1 second, and then press it again briefly.

Function of KIV-700

Muting Volume upon Reception of Phone Call

The audio system automatically mutes when a call comes in.

When a call comes in “CALL” is displayed.

The audio system pauses.

Listening to the audio during a callPress the [SRC] button.

The “CALL” display disappears and the audio system comes back ON.

When the call endsHang up the phone.

The “CALL” display disappears and the audio system comes back ON.

⁄

•To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to <Connecting Wires to Terminals> (page 76).

English 39