Kenwood KIV-BT900, KIV700 Remarks, Audio Control, Make a setting, Select the source, Exit Audio Control mode, Select the setting item to adjust

( : Factory setting)

1 Select the source

Press the [SRC] button. Turn the [Volume] knob and press it when the desired item is displayed. Select a source other than “STANDBY”.

✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly also switches source.

2 Enter Audio Control mode Press the [Volume] knob.

3 Select the setting item to adjust

Turn the [Volume] knob and press it when the desired item is displayed.

4 Make a setting

Turn the [Volume] knob to select a setting value, and then press the [Volume] knob.

5 Exit Audio Control mode

Press the [MENU] button for at least 1 second.

Remarks

• DSP Set

When “DSP Set” is set to “Bypass”, the DSP function is disabled , and the colored items cannot be set.

• HIGHWAY-SOUND

Increases the volume of faintest sound being lost by road noises to make the sound more audible. Additionally, it accentuates bass sound being lost by road noises to make the bass sound more dynamic.

• HIGHWAY-SOUND is not available in tuner source and HD Radio source.

• Supreme+ (Supreme Plus)

Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding. The bass and vocal sound that are cut off by encoding are supplemented for the reproduction of natural sound quality. Supplementing is optimized by compression format and processed according to bit rate. The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range.

• Dual Zone System

Main source and sub source output Front channel and Rear channel separately.

“Preset”

Sets the audio preset.

- Audio Preset Recall (page 47).

- Audio Preset Memory (page 46).

“2Zone Select”

“2Zone Front/Rear”

Sets the Dual Zone System.

- Dual Zone System (page 43).

Audio Adjustments

SRC MENU Volume

Audio Control

You can adjust following Audio Setting items.

Display		Overview
“Subwoofer Level”		You can set subwoofer level.
		“–15” — “0” — “+15”
“DSP Set”		“Bypass”: Disables the DSP function.
		“Through”: Enables the DSP function.
“Equalizer”		Sets the sound quality.
		- Preset Equalizer Curve Select (page 41).
		- Manual Equalizer Control (page 41).
“BassBoost”		Sets the Bass Boost level in two steps.
		“OFF”/ “STEP1”/ “2”
“HIGHWAY-SOUND”		Compensates the low volume or bass sound
		being lost by road noises to make vocal sound
		clearer.
		“OFF”/ “STEP1”/ “2”/ “3”
“Supreme+”		Turns ON/OFF the Supreme plus function.
		Can be set while USB, iPod and Internal
		Memory source.
		“ON”/ “OFF”
“Position”		Compensates the sound environment in
		accordance with the listening position.
		- Listening Position Selection (page 42).
		- Listening Position Fine Adjustments (page
		42).
“Balance”		Adjusts left/right speaker balance.
		(Left) “L15” — “0” — “R15” (Right)
“Fader”		Adjusts front/rear speaker balance.
		(Rear) “R15” — “0” — “F15” (Front)
“2Zone Rear Volume”		Refer to <Dual Zone System> (page 43).
“Subwoofer”		Turns on/off the subwoofer output.
		“ON”/ “OFF”
“Detailed Setup”
	“Car Type”	To get clear sound, set the sound environment
	“Speaker Setting”	according to the location and size of physically
		installed speakers with reference to the
	“Car Type Adjust”
		followings:
	“X'Over”
		- Car Type Selection (page 44).
		- Speaker Setting (page 44).
		- Car Type Fine Adjustments (page 45).
		- X’Over Setting (page 46).
	“Volume Offset”	Sets each source’s volume as a difference from
		the basic volume.
		“–8” — “0” (AUX: “-8”— “+8”)

40 KIV-BT900/ KIV-700