Multi food grinder AT281 (if supplied)
Use the multi food grinder to process raw and cooked meat; fish a nd nuts.
safety
●Always ensure bones and rind etc are removed from the meat before mincing.
●When mincing nuts only feed a few down at a time and allow the scroll to pick them up before adding any more.
●Always use the pusher supplied. Never put your fingers or utensils in the feed tube.
●Warning - the cutting blade is sharp, handle with care both in use and when cleaning.
●Ensure the attachment is secured in position before switching on.
key
ring nut
multi food grinder screens: medium, coarse (due to model v ariants only 1 screen may be supplied)
cutter
scroll
multi food grinder body
tray
pusher
to assemble
1Fit the scroll inside the multi food grinder body.
2Fit the cutter – cutting side outermost . Ensure it’s seated properly – otherwise you could damage your multi food grinder.
3Fit a multi food grinder screen . Put the notch over the pin.
4Loosely fit the ring nut.
to use the multi food grinder
1Raise the mixer head.
2With the multi food grinder in the position shown , align the drive tabs on the end of the scroll with the corresponding slots in the drive outlet.
3Push the multi food grinder into the outlet and turn clockwise until it locks into place.
4Tighten the ring nut manually.
5Fit the tray .
6Thaw frozen food thoroughly before mincing. Cut meat into 2.5cm (1”)
7Switch to maximum speed by turning the speed switch in a clockw ise direction. Using the pusher, gently push the food through, one piece at a time. Don’t push hard – you could damage your multi food grinder. important
●Never operate the multi food grinder attachment for longer than 10 minutes as this could damage your mixer.
●The multi food grinder attachment will not operate unless the medium and high speed outlet covers are fitted.
8Once all the food has been minced, switch off and unplug.
9Remove the multi food grinder.
care and cleaning
●Always switch off and unplug before removing the attachment from the kitchen machine.
●Dismantle the attachment fully before cleaning.
●Wash all the parts in hot soapy water, then dry thoroughly. Don’t wash any part in the dishwasher. Never use a soda solution.
●Wipe the screens with vegetable oil, then wrap in greaseproof paper to prevent discolouring/rusting.
service and customer care
●If the cord is damaged it must, for safety reasons, be replaced by KENWOOD or an authorised KENWOOD repairer.
UK
If you need help with:
●using your appliance
●servicing or repairs
call Kenwood Customer Care on 023 9239 2333. Have your model
number ready - it is located on the underside of your appliance.
●spares and attachments
call 0844 557 3653. other countries
●Contact the shop where you bought your appliance.
●Designed and engineered by Kenwood in the UK.
●Made in China.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste.
It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is marked with a
guarantee UK only
●If your machine goes wrong within one year from the date you bought it, we will repair or replace it free of charge provided:
●you have not misused, neglected or damaged it;
●it has not been modified;
●it is not
●it has not been used commercially;
●you have not fitted a plug incorrectly; and
●you supply your receipt to show when you bought it. This guarantee does not affect your statutory rights.
9
