4Adjust the Audio setup item Press the [] or [] button.5Exit Audio Setup mode Press the [ENTER] button.

Audio Preset Memory

Registering the values setup within Sound Controls. These settings cannot be erased by the Reset button.

1Setup Sound Control

Refer to the following operations to setup the Sound Control.

-<Audio Control> (page 14)

-<Adjusting the detail of Audio Control> (page 14)

-<Audio Setup> (page 14)

2Select Audio Preset item Select the “Audio Preset” display.

For how to select Menu items, refer to <Menu System> (page 8).

3Enter Audio Preset modePress the [ENTER] button for at least 1 second. “Recall” is displayed.4Select the Audio Preset Memory Turn the [VOL] knob.

Select the “Memory” display.

5Determine whether to put the Audio Preset in the memoryPress the [ENTER] button. “Memory?” is displayed.6Put the Audio Preset in the memoryTurn the [VOL] knob to select “YES”, and then press the [ENTER] button.

“Memory Completed” is displayed.

7Exit Audio Preset mode Press the [] button.

⁄

•The memory only holds one audio setting and not settings for each source.

•The following items cannot be registered.

Volume, Balance, Fader, Loudness, Volume offset, Dual Zone System, Rear Volume

Audio Preset Recall

Recalling the sound setup registered by <Audio Preset Memory> (page 15).

1Select the source

For how to select source item, refer to <General function> of <Basic Operation> (page 6).

2Select Audio Preset item Select the “Audio Preset” display.

For how to select Menu items, refer to <Menu System> (page 8).

3Enter Audio Preset mode

Press the [ENTER] button for at least 1 second.

4Select the Audio Preset Recall Turn the [VOL] knob.

Select the “Recall” display.

5Determine whether to recall the Audio Preset Press the [ENTER] button.

“Recall?” is displayed.

6Recall the Audio Preset

Turn the [VOL] knob to select “YES”, and then press the [ENTER] button.

“Recall Completed” is displayed.

7Exit Audio Preset mode Press the [] button.

⁄

•The User memory of “System Q” in <Audio Control> (page 14) is changed to the value which was recalled.

•The source tone memory item of <Audio Control> (page

14)is changed to the value which was recalled by the selected source.

English 15