Kenwood KMR-700U Remote control ID setup, Remote control ID delete, Dual zone control setup, Cancelling Remote control ID setup, Cancelling Remote control ID delete

Remote control (Optional accessory) setup

Remote control ID setup

When connecting the remote control KCA-RC107MR (Optional accessory) to this unit, you should register the ID for KCA-RC107MR.

1Enter Remote control setup mode

Press the [2ZONE] button for at least 1 second.

2Select the Remote control ID setup item Turn the [VOL] knob to select “Remote ID Set”, and then press the [ENTER] button.

Remote control ID list is displayed. “Yes” indicates that this ID is already registered. “No” indicates that this ID is available.

3Enable Remote control ID registration Press the [ENTER] button. “Registering...” is displayed.

4Register Remote control ID

For KCA-RC107MR, press the [ENTER], [SRC], or [DISP] button.

Button	Remote control ID
[ENTER]	ID1 is registered.
[SRC]	ID2 is registered.
[DISP]	ID3 is registered.

“ID# Setup Completed” is displayed.

5End Remote control setup mode Press the [2ZONE] button.

Cancelling Remote control ID setup

Press the [2ZONE] button for at least 1 second.

⁄

•When removing KCA-RC107MR, delete the registered remote control ID, as described in <Remote control ID delete> (page 20).

Remote control ID delete

Delete the ID registered for the remote control KCA- RC107MR (optional accessory).

1Enter Remote control setup mode

Press the [2ZONE] button for at least 1 second.

2Select the Remote control ID delete item Turn the [VOL] knob to select “Remote ID Delete”, and then press the [ENTER] button. List of the IDs registered for remote controls is displayed.

3Select the remote control ID to be deleted Turn the [VOL] knob.

4Delete the Remote control ID Press the [ENTER] button. “Remote ID# Delete?” is displayed.

5Turn the [VOL] knob to select “YES”, and then press the [ENTER] button.

“ID# Delete Completed” is displayed.

6End Remote control setup mode Press the [2ZONE] button.

Cancelling Remote control ID delete

Press the [2ZONE] button for at least 1 second.

Dual zone control setup

When the dual zone function is set to ON, select the channel, either front or rear, to be controlled by the remote control KCA-RC107MR (optional accessory).

1Enter Remote control setup mode

Press the [2ZONE] button for at least 1 second.

2 Select the Dual zone control setup item Turn the [VOL] knob to select “Remote Zone Select”, and then press the [ENTER] button.

Current settings are displayed for the registered remote control IDs.

3 Select the target remote control ID Press the [u] or [d] button.

4	Select the target channel
	Press the [ ] or [ ] button.
	Display	Controlled channel during dual zone mode
	“Front”	Front channel is controlled.
	“Rear”	Rear channel is controlled.
5	End Remote control setup mode
	Press the [2ZONE] button.

20 KMR-700U