Getting Started
Coonnecting iPod or USB device
Press the Release button.
Release button
⁄
•Be sure to use the cushion bag which protects iPod or USB device against shock.
•Do not overload the opened faceplate. If you do so, the faceplate may be damaged.
6Close the faceplate.
Pull the faceplate open, while supporting it with your hand.
Remove the terminal cover.
Terminal cover
②
①
③
Removing iPod or USB device
Pull out the terminal to be used, and then replace the terminal cover.
Connect iPod and USB device to the terminal.
Insert the connected iPod and USB device into the cushion bag (accessory), and place it on the terminal cover.
Cushion bag
Enter Remove mode
Press the [iPod] button for at least 2 second.
“REMOVE” is displayed.
2Select the device to be removed
Select the device to be removed by turning
the [VOL] knob, and press the [ENTER] button
3Turn the [VOL] knob to select “YES”, and then press the [ENTER] button
4Press the Release button.
Pull the faceplate open, while supporting it with your hand
5Remove the device.
Only the device selected in step 2 can be removed.
⁄
•Keep the unused terminal in the terminal cover to avoid being damaged.
Cancelling the Remove mode
Press the [iPod] button for at least 1 second.
4