Other features (See page 6)

English

Audio Control SettingAdjust various parameters of sound quality.

1Press the AUD button to enter the control mode.

Each time the AUD button is pressed, the adjustment mode display changes as follows:

7Bass 7Treble 7Balance 7Fader 7Volume

If you do not move to step 2 in 5 seconds, the unit will switch back to the volume adjustment mode (i.e., the normal mode).

NOTE Source tone memory

Each source (tape, FM, AM, and disc changer) has its own memory in which to store the bass and treble tone settings.

The settings made for a particular source are then recalled automatically whenever you use that source (e.g., FM mode uses the tone settings made for FM, AM for AM, etc.).

2Press the d/ubuttons to adjust the mode shown in the dis- play.

Use the following table as a guide for adjusting the settings in each mode.

Adjustment

Operation of Audio control button

mode

 

 

(Display)

dbutton

ubutton

Bass

Bass decreased.

Bass increased.

(“BAS”)

 

 

 

 

 

Treble

Treble decreased.

Treble increased.

(“TRE”)

 

 

 

 

 

Balance

Left channel empha-

Right channel empha-

(“BAL”)

sized.

sized.

 

 

 

Fader

Rear channel

Front channel

(“FAD”)

increased.

increased.

 

 

 

Clock DisplayDisplay the time.Switching to Time Display:

Press the CLK button repeatedly until the clock is displayed.

Adjusting TimeAdjust the time.

1When the time is not displayed, first press the CLK button to display the time.

2Hold down the CLK button for one second or more to enter the Time Adjustment mode.

The hour display will blink.

3• Adjusting the hours

Press the FM button to advance the hours, or press the AM button to make the hours go back.

•Adjusting the minutes

Press the ¢ button to advance the minutes, or press the 4 button to make the minutes go back.

4Press the MENU button to end the Time Adjustment mode.

— 10 —