English
Troubleshooting Guide
External disc control modePROBLEM | POSSIBLE CAUSE | SOLUTION | |
|
|
| |
The disc control mode cannot | No wire has been connected to the disc changer input | Connect the wire to the disc changer input terminal on | |
be selected. | terminal on the unit. | the unit. | |
|
|
| |
The specified disc does not | The specified CD is quite dirty. | Clean the CD. | |
play, but another one plays |
|
| |
The CD is | Load the CD with the labeled side up. | ||
instead. | |||
|
|
| |
| The disc is loaded in a different slot from that specified. | Eject the disc magazine and check the number for the | |
|
| specified disc. | |
|
|
| |
| The disc is severely scratched. | Try another disc instead. | |
|
|
| |
The sound skips. | Something is touching the disc changer. | Remove whatever is touching it. | |
|
|
| |
| The CD is scratched or dirty. | If skipping happens at the same place when the car is | |
|
| stopped, something with the CD is wrong. Clean the CD. | |
|
|
| |
The display shows that the | The computer chip in the unit is not functioning normally. | Press the reset button on the unit (see p.4). | |
changer is being played, but no |
|
| |
sound can be heard. |
|
| |
|
|
| |
The specified track will not | Random play or magazine random play has been selected. | Turn off random play or magazine random play. | |
play. |
|
| |
|
|
|
•Even though the disc changer is connected, the Disc Changer Mode is not on, with "AV in" showing in the display during the Changer Mode.
•Even though no device