Tuning

You can choose between auto seek tuning of receivable frequencies and manual tuning.

1Press the SRC (source) button repeatedly to select the tuner mode. "TUuE" is displayed when the tuner mode has been selected.

2Press either the FM or AM button to select the band. Each time you press the FM button, the band switches between FM1, FM2, and FM3 (which are used for groups of preset stations).

Press the AM button to select the AM band.

3Press the AUTO button to switch between auto seek tuning and manual tuning.

The AUTO indicator lights up only when auto seek tuning is selected.

4• Auto Seek Tuning

Press the ¢ button to seek higher frequencies.

Press the 4 button to seek lower frequencies.

•Manual Tuning

Press the ¢ button to increase the frequency by one step. Press the 4 button to decrease the frequency by one step.

NOTE

The STEREO indicator lights up when stereo broadcasts are being received.

Recalling a Preset Station:

Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed.

NOTE

You can store six stations in each of the FM1, FM2, FM3, and AM bands.

Auto Memory Entry

You can automatically store all the receivable frequencies in the band currently being listened to, and then recall them with the touch of a button later. This function is especially useful when you are travelling and do not know what stations are available. Up to six frequencies can be stored this way.

1Select the band for auto memory entry.

2Press the AME button for at least two seconds to start auto memory entry.

The numbers of the preset station buttons are shown in order. When all the stations in a certain band are stored in the preset memory, the auto memory entry stops. The tuner then plays the last station received.

Recalling a Preset Station:

Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed.

Station Preset Memory

Store the frequency of a station. You can then recall that station with a single touch of a button.

1Select the band/ station that you want to have stored.

2Press the button (#1-6) that you want to use for the station, for at least two seconds.

The button number blinks once in the display to indicate that the data has been stored.

— 9 —