English
Other features (See page 7)
| Function of the | Theft Deterrent Faceplate | |
| Selectable Illumination | 7 | The faceplate of the unit can be detached and taken with you, | |
| You can switch the colour of the button illumination between | helping to deter theft. | ||
| green and amber. |
|
| |
1 | Hold down the MENU button for one second or more. |
| Projections |
| "MENU" is displayed and the menu mode is turned on. |
| Release button |
2 | Press the ¢ button repeatedly until the Selectable |
| Grooves |
| Illumination function appears in the display. |
|
|
| Press the 4 button to search in the other direction. |
|
|
| The function setting is indicated by "COL GRN" or "COL AMB" |
| Removing Faceplate: |
| in the display, indicating that the current colour is green or |
| Press the release button. |
| amber, respectively. |
| The faceplate is unlocked, allowing you to detach it. |
3 | Switching settings |
| NOTE |
| Press either the AM button or FM button. |
| • The faceplate is a precision piece of equipment and can be |
| The display and setting will change. |
| damaged by shocks or jolts. For that reason, keep the faceplate |
4 | Press the MENU button to end the menu mode. |
| in its special storage case whilst detached. |
Function of the
A red indicator blinks on the unit after the faceplate is removed, warning potential thieves. The factory default for this function is "ON".
Turning Disabled System Indicator On/Off:1Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.
2Press the ¢ button repeatedly until the Disabled System Indicator function appears in the display.
Press the 4 button to search in the other direction..
The function setting is indicated by "DSI ON" or "DSI OFF" in the display, indicating that the disable system indicator is on or off, respectively.
3Switching settings
Press either the AM button or FM button. The display and setting will change.
4Press the MENU button to end the menu mode.
•Do not expose the faceplate or its storage case to direct sun- light or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
Reattaching Faceplate:1Align the projections on the unit with the grooves on the face- plate.
2Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use the unit.
— 22 —