Basic operations (See page 5)

English

PowerTurning on the power:

Press the SRC button.

NOTE

Turn the power on before carrying out the following procedures.

Turning off the power:

Hold down the PWR OFF button for one second or more.

Selecting the standby mode:

Press the SRC button repeatedly to select to "ALL OFF". When "ALL OFF" is displayed, the standby mode is turned on. The standby mode turns all functions off although leaving the unit’s power on. Use this mode when you want to have the display illuminated but do not want to listen to anything.

NOTE

The AF function can be turned on or off even when the standby mode has been turned on. If the power is on, the AF function tunes in to stations that offer good reception.

VolumeIncreasing Volume:

Press the ubutton to turn up the volume.

Decreasing Volume:

Press the dbutton to turn down the volume.

AttenuatorThis function allows you to turn down the volume quickly.Turning Attenuator On/Off:

Press the ATT button to switch the attenuator on and off. When the attenuator is on, the ATT indicator blinks.

When the attenuator is off, the volume returns to the original level.

NOTE

Turning down the volume all the way turns off the attenuator function.

Switching ModesSwitching Modes:

Each time you press the SRC button, the mode switches as follows:

▼

Tuner mode

▼

Tape mode

▼

Disc changer mode

▼

Standby mode

NOTE

The mode switches to the next mode from any mode which cannot be used.

LoudnessThis function amplifies low and high tones when the volume is turned down.The LOUD indicator lights up, when the loudness function is on.Turning Loudness On/Off:

Press the LOUD button to switch the loudness on and off.

— 8 —