Adjustment Item | Display | Range |
Bass level | "BAS" | |
Treble level | "TRE" | |
Balance | "BL" | Left 15 — Right 15 |
Fader | "FD" | Rear 15 — Front 15 |
5Exit Audio Control mode Press the [A.ADJ] button.
Switching Clock Display
Switching the displayed information.
Press the [CLK] button.
Each time the button is pressed it switches between clock display and current source.
During clock display the clock indicator is ON.
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken with you, helping to deter theft.
Removing the Faceplate
Press the Release button.
The faceplate is unlocked, allowing you to detach it.
• The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached.
•Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.
Reattaching the Faceplate
1Align the projections on the unit with the grooves on the faceplate.
Adjusting Clock
1Select the clock display Press the [CLK] button.
2Enter clock adjustment mode
Press the [CLK] button for at least 2 seconds. The clock display blinks.
3Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [4] or [¢] button.
4Exit clock adjustment mode Press the [CLK] button.
2Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to use the unit.
— 7 —
