Kenwood KRC-178RA, KRC-178RG, KRC-278RA, KRC-278RG Red, B–1, B–2, B–3, B–4, B–5, B–6, B–7, B–8, Gray, Black, White, Green, Yellow, Purple, Battery, Speaker, Functions, Connector, Connector, Blue/White

Connecting Cables to Terminals

Connector Function Guide

Pin Numbers for	Cable Colour	Functions
ISO Connectors
External Power
Connector
A–4	Yellow	Battery
A–5	Blue/White	Power Control
A–7	Red	Ignition (ACC)
A–8	Black	Earth (Ground)
		Connection

KENWOOD disc changer control input

(KRC-278RA/278RG//23RA/23RG only)

NOTE

To connect the Disc changer, consult your Disc changer manual.

Rear left output (White)

Rear right output (Red)

Antenna Cord (ISO)

Speaker
Connector	Purple	Rear Right (+)
B–1
B–2	Purple/Black	Rear Right (–)
B–3	Gray	Front Right (+)
B–4	Gray/Black	Front Right (–)

FM/AM antenna input	Antenna Conversion Adaptor
	(ISO–JASO) (Accessory3)

Fuse (10A)

Wiring harness (Accessory1)

B–5	White	Front Left (+)
B–6	White/Black	Front Left (–)
B–7	Green	Rear Left (+)
B–8	Green/Black	Rear Left (–)

TEL mute cable (Brown)

TEL MUTE

Connect to the terminal that is grounded when either the telephone rings or during conversation.

NOTE

Battery cable (Yellow)

Ignition cable (Red)

A–7 Pin (Red)

If no connections are made, do not let the cable come out from the tab.

Power control/ Motor antenna control cable (Blue/White)

To connect the KENWOOD navigation system, consult your navigation manual.

Connect either to the power control terminal when using

				P.CONT
A–4 Pin (Yellow)				ANT.CONT
Connector A	8	6	4	2
	7	5	3	1
Connector B	8	6	4	2
	7	5	3	1

the optional power amplifier, or to the antenna control terminal in the vehicle.

If no connections are made, do not cut the tube off from the edge of the cable.

— 25 —