This function produces a beep sound that accompanies button operation. It can be switched on or off.
Display and setting:"BEEP ON" : Beep setting is on.
"BEEP OFF" : Beep setting is off.
NOTE
The beep sound is not output from the preout jacks.
Manual Time AdjustmentAdjust the time manually.
NOTE
This adjustment is available only when the automatic time adjustment is set to off.
Display and setting:
1Select the display "CLK ADJ" during the selecting function in the menu system.
2Hold down either the 4 or ¢ button for two seconds or more to enter the Manual time adjustment mode.
The time display will blink.
3• Adjusting the hours
Press the FM button to advance the hours, or press the AM button to make the hours go back.
•Adjusting the minutes
Press the ¢ button to advance the minutes, or press the 4 button to make the minutes go back.
Automatic Time AdjustmentWith automatic time adjustment, you can set the clock time automatically according to time data sent from RDS stations (after receiving RDS signals for several minutes). You can also
set the time manually if the automatic time adjustment function is turned off. The factory default is automatic time adjustment.
Display and setting:
"SYNC ON" : Automatic time adjustment
"SYNC OFF" : Manual time adjustment
Adjusting Time Automatically:Tune into an RDS station for 3 or 4 minutes.
The time adjusts automatically to the correct local time.
NOTE
The time is not adjusted when the RDS station you are tuned to is not transmitting a time signal. Choose another RDS station in such a case.
— 21 —