English
Troubleshooting Guide
CD/MD/External disc control modePROBLEM |
| POSSIBLE CAUSE | SOLUTION |
|
|
|
|
The disc control mode cannot |
| No wire has been connected to the disc changer input | Connect the wire to the disc changer input terminal on |
be selected. |
| terminal on the unit. | the unit. |
|
|
|
|
The specified disc does not |
| The specified CD is quite dirty. | Clean the CD. |
play, but another one plays |
|
|
|
| The CD is | Load the CD with the labeled side up. | |
instead. |
| ||
|
|
|
|
|
| The disc is loaded in a different slot from that specified. | Eject the disc magazine and check the number for the |
|
|
| specified disc. |
|
|
|
|
|
| The disc is severely scratched. | Try another disc instead. |
|
|
|
|
The sound skips. |
| Something is touching the disc changer. | Remove whatever is touching it. |
|
|
|
|
|
| The CD is scratched or dirty. | If skipping happens at the same place when the car is |
|
|
| stopped, something with the CD is wrong. Clean the CD. |
|
|
|
|
The display shows that the |
| The computer chip in the unit is not functioning normally. | Press the reset button on the unit (see p. 4). |
changer is being played, but no |
|
|
|
sound can be heard. |
|
|
|
|
|
|
|
The specified track will not |
| Random play or magazine random play has been | Turn off random play or magazine random play. |
play. |
| selected. |
|
|
|
|
|
Track repeat, disc repeat, track |
| The setting is not canceled. | The settings for these functions remain on until the |
scan, random play, and |
|
| setting to off or the disc ejected, even if the power is |
magazine random play start by |
|
| turned off or the source changed. |
themselves. |
|
|
|
|
|
|
|
Cannot play |
| Finalization processing is not being conducted for CD- | Conduct finalization processing with CD recorder. |
|
|
| |
|
|
|
|
|
| A | Use a CD changer compatible with |
|
|
| |
|
|
|
|
— 24 —