General features
English
This function allows you to adjust the setting that is recalled with the System Q, according to types of speakers.
1Press the SRC button repeatedly to select the standby mode. "OFF" is displayed when the standby mode is selected.
2Press the Q button to enter the mobile preset plan mode.
3Press either the 4 or ¢ button to select the type of speaker. The setting switches as follows.
Off
4Press the Q button to end the mobile preset plan mode.
NOTE
When you change the setting of type of speaker, the bass, middle, and treble tone settings are returned to original levels.
Clock displayChanging the Clock Display:Press the CLK button to switch the clock display on and off.
NOTE
The clock indicator lights while the clock is displayed.
button to make the hours go back.
•Adjusting the minutes
Press the ¢ button to advance the minutes, or press the 4 button to make the minutes go back.
4Press the CLK button to end the clock adjustment mode.
Disabled System Indicator (DSI)A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. The factory default for this function is ON.
Turning Disabled System Indicator On/Off:1Turn the power of the unit off.
2While pressing buttons #1 and #3 at the same time, press the SRC button.
Repeat steps 1 and 2 above to turn DSI back on.
Theft Deterrent FaceplateThe faceplate of the unit can be detached and taken with you, helping to deter theft.
Adjust the time.
1When the clock is not displayed, first press the CLK button to display the clock.
2Press the ADJ button for at least two seconds to enter the clock adjustment mode. The clock display will blink.
3• Adjusting the hours
Press the FM button to advance the hours, or press the AM
Projections
Release button
Grooves
Removing the Faceplate: Press the release button.The faceplate is unlocked, allowing you to detach it.
— 8 —