In case of difficulty
Remote control unit
Symptom | Cause | Remedy |
|
| 19 |
| Remote control operation is not | • Batteries are exhausted. | • Replace with new batteries. | 9 |
| |
| possible. | • The remote control unit is too far away | • Operate the remote control unit within |
| ||
| from the main system, controlling angle | the controllable range. |
|
|
|
| is too large, or there is an obstacle be- |
|
|
|
|
| tween the receiver and the remote. |
|
|
|
|
| • The audio cords and system control cords | • Connect properly referring to “Setting |
| ||
| are not connected properly. | up the system”. | 46 |
| |
| • No software is loaded in the source | • Place software in the source component |
| ||
| component. | you want to play. |
|
|
|
| • An attempt is made to play a tape which | • Wait until recording has completed. |
| ||
| is being recorded in the cassette deck. |
|
|
|
|
|
|
|
|
|
|
Memory back up function
Please note that the following items will be deleted from the unit's memory if the power cord is disconnected from the AC outlet or the main power switch is turned off for approximately 3 days.
•Power mode
•Input selector settings
•Volume level
•Broadcast band
•Frequency setting
•Preset stations
Other