34 EN
In case of difficultyRemote control unit
Cause
•The remote control is set to a different opera-
tion mode.
•Batteries are exhausted.
•The remote control unit is too far away from
the main system, controlling angle is too large,
or there is an obstacle between the receiver
and the remote.
•The audio cords and system control cords are
not connected properly.
•No software is loaded in the source compo-
nent.
•An attempt is made to play a tape which is
being recorded in the cassette deck.
Remedy
•Press the source select keys or DVD POWER
keys to select the appropriate operation mode.
•Replace with new batteries.
•Operate the remote control unit within the
controllable range.
•Connect properly referring to “Setting up the
system”.
•Place software in the source component you
want to play.
•Wait until recording has completed.
Symptom
Remote control operation is not possible.
*5197/31-36/EN 26/03/2002, 2:58 PM34