Connecting the speakers

1 Strip coating.

2 Loosen.

 

 

 

 

3 Insert.

4 Secure.

Setting up the system

13

1 Strip coating.

2 Push the lever.

 

 

 

 

3 Insert the cord.

4 Return the lever.

Preparations

 

Front Speakers A

Right Left

The KRF-V5030D/ V4530D are equipped with one-touch speaker terminals.

Center Speaker They are arranged in the same manner as the

speaker terminals of the KRF-V7030D/V6030D.

Refer to the instructions on making connections to the KRF-V7030D/ V6030D when making connections to the KRF- V5030D/V4530D.

•Never short circuit the + and – speaker cords.

•If the left and right speakers are connected inversely or the speaker cords are connected with reversed polarity, the sound will be unnatu- ral with ambiguous acoustic imaging. Be sure to connect the speak- ers correctly.

Speaker impedance

After confirming the speaker impedance indications printed on the rear panel of the receiver, connect speakers with matching impedance ratings. Using speakers with a rated impedance other than that indicated on the rear panel of the receiver could result in malfunctions or damage to the speakers or receiver.

FRONT SPEAKERS

CENTER SPEAKERS

 

 

 

RED

(8 – 16 Ω ) BLUE

(8 – 16 Ω ) GREEN

R

L

C

 

 

 

+

+

-

–￿

FRONTCENTER

SPEAKERSSPEAKER

KRF-V7030D/V6030DKRF-V5030D/V4530D

FRONT SPEAKERS

(8 – 16 Ω )

+ –￿–￿ +

SUB WOOFER PRE OUT

Use the FRONT

SPEAKERS B

terminals if you want ORANGE

(8 – 16 Ω )

GRAY

SURROUND SPEAKERS

to connect a second

 

 

front speaker system

 

 

(except for KRF-

 

 

V5030D/V4530D).

 

 

Powered

RightLeft

subwoofer

Surround Speakers (Be sure to connect both surround speakers)