When the DTS signal is input: (KRF-V7030D only)

26

(The DTS indicator lights up.)

 

 

 

 

 

 

 

1DTS: DTS surround

 

 

 

 

 

 

 

 

 

 

 

2STEREO: Normal stereo playback

 

 

 

 

 

 

When the analog signal or the digital signal except for the

 

DOLBY DIGITAL or DTS signal is input:

 

 

 

 

 

 

1PRO LOGIC: PRO LOGIC surround (The PRO LOGIC

 

 

 

 

 

 

 

 

 

 

 

 

indicator lights up.)

 

 

 

 

 

 

23 STEREO: 3-STEREO surround (The 3 STEREO indicator

 

 

 

 

 

 

lights up.)

 

 

 

 

 

 

3STEREO: Normal stereo playback

 

 

 

 

 

 

 

• If a Dolby Digital signal having more channels than the maximum

 

 

number of playback channels available using the receiver’s current

 

 

settings is input, the DOWN MIX indicator on the front panel lights

 

 

up and downmixing is performed to match the number of available

 

 

channels.

3Adjust the volume.

 

Notes

 

 

 

 

• Depending on the type of the signal or speaker setting, some listening

 

modes cannot be selected.

 

 

• When playback is started, the sound may be cut or interrupted before

Operations

the input source is confirmed as Dolby Digital.

 

• To enjoy Dolby Digital (AC-3) surround (as well as all the other listening

 

 

modes) from a single component, be sure to use a Dolby Digital (AC-

 

3) compatible source component. Connect the Dolby Digital (AC-3)

 

compatible source component's Dolby Digital (AC-3) format digital

 

audio signal to one of the DIGITAL INPUT jacks on the back of the

 

receiver. Connect the normal audio signal correctly to the respective

 

component's AUDIO jacks.

890

 

 

 

Ambience effects

DVD 6-channel playback

Using a DVD player or the like equipped with six (5.1) output channels and the receiver, you can enjoy surround sound playback.

When you try to play a disc other than Dolby Digital (AC-3) such as DTS CD, no sound is produced or, noise may be heard. To avoid this situation, make sure that you connect the component to the receiver’s DVD 6CH. INPUT jacks through a surround processor which can decode the surround signal you wont to listen to.

Connecting a DVD player which can decode the surround signal itself is also acceptable.

 

 

 

 

 

 

 

 

 

INPUT MODE

 

 

 

 

 

 

 

 

 

INPUT SELECTOR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

￿￿

DVD

DVD

RC-R0610

RC-R0510

Preparations

•Connect your DVD player to the DVD 6ch jacks of the receiver.

•Turn on all other components that will be used.

• Complete “Preparing for surround sound”.

%

1Select “DVD/6ch” as the input source.

•If speaker system B is on when “DVD/6ch” is selected as the input source, it switches off and speaker system A turns on automatically.

2Select "6CH INPT" by pressing the INPUT MODE key.

3Start playback of the DVD software.

4Adjust the volume.

•It is not possible individually to adjust the volume level or sound quality (SET UP, SOUND) of the separate channels when the receiver is in the DVD 6ch mode. Adjust the volume with the controls of the DVD player. For the powered subwoofer, you can adjust the volume of the subwoofer using the subwoofer’s own volume control.

•(KRF-V5030D/V4530D only)

When you press the POWER (DVD) key and the DVD player does not turn on, press the 1 or 2 key during pressing the POWER (DVD) key.