32 EN
Ambience effects
CS
II
Rear Delay adjustment mode (CS
II
mode only)
CS II Rear Delay adjustment provides a better sound effect from the rear
speakers.
1Press the SOUND key, then press the MM
MM
M/??
??
? keys or Joystick (2/3)
until “CSII DLY” appears on the display.
2Use the MULTI CONTROL knob or Joystick (5/∞) to adjust the
rear speaker.
•The adjustment range is from 0 ms to 25 ms.
L
SL SB SR
CR
SP MUTE
OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII
A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
SW
LFE
CS
II
Gain adjustment mode (CS
II
mode only)
CS II GAIN allows user to adjust the input gain for the Circle Surround II
processing.
1Press the SOUND key, then press the MM
MM
M/??
??
? keys or Joystick (2/3)
until “CSII GAIN” appears on the display.
2Use the MULTI CONTROL knob or Joystick (5/∞) to adjust the
input gain.
•The adjustment range is from 0 to 18.
L
SL SB SR
CR
SP MUTE
OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII
A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
SW
LFE
TruBass adjustment mode (CS
II
mode only)
TruBass adjustment provides deep, rich bass sound to various speakers.
1Press the SOUND key, then press the MM
MM
M/??
??
? keys or Joystick (2/3)
until “TruBass” appears.
2Use the MULTI CONTROL knob or Joystick (5/∞) to select the
following;
1TruBass OFF
2TruBass SW
3TruBass LR
4TruBass SW + LR
•After selecting 2, 3 or 4, TruBass speaker size and level adjustment
selection will be available.
3For TruBass speaker selection, use the MULTI CONTROL knob
or Joystick (5/∞) to select any of the following display;
1TruBass LARGE
2TruBass MID
3TruBass SMALL
4Use the MULTI CONTROL knob or Joystick (5/∞) to adjust the
TruBass Level.
•The adjustment range is from 0 (TruBass OFF) to 10.
L
SL SB SR
CR
SP MUTE
OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII
A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
SW
LFE
Display dimmer adjustment
The dimmer function lets you select the brightness of the receiver's
display. You might find this useful if you darken your room to watch
movies or listen to music.
Each time you press the DIMMER key, the display’s brightness
changes among the three available settings.
Select the brightness level you find most pleasing.
1Bright
2Medium
3Dark
96kHz LPCM playback
The receiver is compatible with the 96kHz LPCM playback. To play a
96kHz DVD, set the listen mode to “STEREO”.
•In FULL AUTO input mode, the listen mode will automatically be
STEREO.
•When in DIGITAL MANUAL input mode (listen mode is not STEREO),
“FS 96kHz” will appear in the display and no sound can be heard from
the speakers.
Press the LISTEN MODE or STEREO key (the listen mode changes to
the STEREO mode) to output sound from the speakers.
•VR6050/28-34/EN 4/10/02, 5:10 PM32