Kenwood KRF-V6060D, KRF-V7060D, VR-6050 Specifications For the U.K. only AUDIO section (KRF-V6060D), DIGITAL AUDIO section, VIDEO section, FM tuner section, MW tuner section, GENERAL

43 EN
Notes
1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
2.The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
Specifications
For the U.K. only
AUDIO section (KRF-V6060D)
Rated power output during STEREO operation
DIN/IEC (63 Hz ~ 12.5 kHz, 0.09 % T.H.D. at 6 )
...............................................................................100 W + 100 W
Effective power output during SURROUND operation
FRONT (63 Hz ~ 12.5 kHz, 0.09 % T.H.D. at 6 Ω one channel
driven)................................................................... 100 W + 100 W
CENTER ( 63 Hz ~ 12.5 kHz, 0.09 % T.H.D. at 6 Ω one channel
driven).....................................................................................
100 W
SURROUND ( 63 Hz ~ 12.5 kHz, 0.7 % T.H.D. at 6 Ω one channel
driven)............................................................................
100 W + 100 W
Total harmonic distortion .......................0.009 % (1 kHz, 50 W, 6 Ω)
Frequency response
Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)
.................................................10 Hz ~ 100 kHz, +0 dB ~ –3.0 dB
PHONO ‘RIAA’ response.............. 40 Hz ~ 20 kHz, +1.5 dB ~ –3.0 dB
Maximum input level
PHONO (MM)....................................45 mV, 1 % T.H.D. at 1 kHz
Signal to noise ratio (IHF’66)
PHONO (MM)........................................................................ 75 dB
Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)
...............................................................................................95 dB
Loudness control
VOLUME at –30 dB level...................................... +6 dB (100 Hz)
Input sensitivity / impedance
PHONO (MM)........................................................ 6.0 mV / 47 kΩ
Line (CD/DVD, TAPE, VIDEO 1, VIDEO 2, VIDEO 3, DVD/6CH)
..............................................................................500 mV / 47 kΩ
Output level / impedance
TAPE REC............................................................... 500 mV / 1 kΩ
PRE OUT (SURROUND BACK CHANNEL).............. 2.5 V / 1 kΩ
PRE OUT (SUBWOOFER) ......................................... 2.5 V / 1 kΩ
Tone control
BASS................................................................ ±10 dB (at 100 Hz)
TREBLE............................................................ ±10 dB (at 10 kHz)
DIGITAL AUDIO section
Sampling frequency...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
Input level / impedance / wave length
Optical........................... (–15 dBm ~ –24 dBm), 660 nm ±30 nm
Coaxial...................................................................0.5 Vp-p / 75 Ω
VIDEO section
VIDEO inputs / outputs
VIDEO (composite)................................................. 1 Vp-p / 75 Ω
S VIDEO inputs /outputs
S VIDEO (luminance signal)...................................1 Vp-p / 75 Ω
S VIDEO (chrominance signal)....................... 0.286 Vp-p / 75 Ω
FM tuner section
Tuning frequency range.....................................87.5 MHz ~ 108 MHz
Usable sensitivity
MONO............ 1.3 µV (75 Ω)/ 13.2 dBf (40 kHz dev, S/N 26 dB)
STEREO.... 45 µV (75 Ω)/ 42.1 dBf (40 + 6 kHz dev, S/N 46 dB)
Total harmonic distortion
MONO (1 kHz, 40 kHz dev)....................... 0.2% (65.2 dBf input)
STEREO (1 kHz, 40 + 6 kHz dev)...............0.8% (65.2 dBf input)
Signal to noise ratio (DIN weighted at 1 kHz)
MONO........................................................ 65 dB (65.2 dBf input)
STEREO..................................................... 60 dB (65.2 dBf input)
Stereo separation (1 kHz)........................................................... 36 dB
Selectivity (±300 kHz) .................................................................64 dB
Frequency response (30 Hz ~ 15kHz)..................... +0.5 dB, –3.0 dB
MW tuner section
Tuning frequency range..................................... 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod, S/N 20 dB) .........16 µV / (600 µV/m)
Signal to noise ratio (400 Hz, 30% mod)
..........................................................50 dB (60 dBµ VEMF input)
GENERAL
Power consumption ................................................................. 330 W
AC outlet
SWITCHED ...................................................... (total 90 W max.)
Dimensions..................................................... W : 440 mm(17-5/16")
H : 159 mm (6-1/4")
D : 392 mm (15-7/16")
Weight (Net)................................................................ 9.8 kg (21.6 lb)
•VR6050/35-44/EN 4/9/02, 4:58 PM43