33 EN
The remote control supplied with this receiver is also capable
of controlling components from a variety of manufacturers
once you register the appropriate setup codes into the
remote control unit.
Low battery warning
Replace all two batteries with new ones when you notice a shortening
of the distance from which the remote control will operate. In order
to retain the setup codes, please change the batteries approximately
within 30 seconds. If the setup codes are erased, please re-enter the
codes.
Registering setup codes for other components
SOURCE
Numeric keys
REMOTE MODE
INPUT
SELECTOR
1
Find the setup code of the component to be registered.
•Refer to the setup code lists to find the setup code for the
component to be registered. fifl
Example: To register a DVD made by KENWOOD, you would enter
“805”.
Input Component Maker Code Key
(DVD) DVD player KENWOOD 805, 808 DVD
2
Registering components for REMOTE MODE [(DVD, CBL,
DSS/SAT, VCR, TV, OTHERS - RC-R0725/R0727) or (DVD, CD,
CBL/SAT, VCR, TV, OTHERS - RC-R0726)] keys.
1For DVD, CD, CBL, DSS/SAT, CBL/SAT, VCR or TV keys;
Hold down the SOURCE key and press the numeric keys to
enter the setup code.
•Example: Press “805” to register a DVD player manufactured by
KENWOOD.
•If you push an invalid key, the remote control will exit the setup
mode.
2The OTHERS key enables you to operate another DVD, CD,
CBL, DSS/SAT, CBL/SAT, VCR or TV component.
For OTHERS key;
Hold down the OTHERS key and press the numeric keys to
enter the setup code.
•Example: After you have registered the KENWOOD DVD player,
press “804” to register another DVD player which is manufactured
by Panasonic.
•If you push an invalid key, the remote control will exit the setup
mode.
3
Press any of the REMOTE MODE key and then press the
SOURCE key to check that the component you want to
control turns on.
If the component does not react, and there is more than one
setup code, enter another setup code and try again.
•If the component is already on, pressing the SOURCE key will
turn it off.
4
Repeat steps
2
to
3
to register additional components until
all components have been registered.
Alternative REMOTE MODE key .
This operation is optional and is convenient when you link an INPUT
SELECTOR key to the REMOTE MODE key. While operating one
component, the INPUT SELECTOR key functions as an alternative
REMOTE MODE key to select another component.
•Example: REMOTE MODE (DVD) key can be linked to the INPUT
SELECTOR (VIDEO 1) key as described below;
1After registering the setup code, press and hold the SOURCE
key and then press the REMOTE MODE (DVD) key.
2While holding down the SOURCE , press the INPUT
SELECTOR (VIDEO 1) key.
•Now the VIDEO 1 key will function as a DVD key which can be
selected at the same time while operating a CD player.
•Repeat step 1 to 2 to link other INPUT SELECTOR keys.
Note
Although each setup code is designed to work with a number of
different models, certain codes may not work with some models.
(Also, certain codes may only operate some of the functions available
on a given model.)
Basic remote control operations for other components •VR6050/28-34/EN 4/17/02, 6:25 PM33