20 EN

Preparing for surround sound

Speaker settings

To enable you to obtain optimum enjoyment from the receiver’s listening
modes, make sure to complete the speaker settings (subwoofer, front,
center, and surround speakers) as described below.
SETUP MULTI CONTROL
POWER ON/OFF
(KRF-V8060D)
POWER
SET UP
Joystick
(MULTI CONTROL 5/∞,
DOWN 2/UP3)
POWER
ON/STANDBY
(VR-6060)
ON/STANDBY
(KRF-V8060D)
1

Turn on the power to this receiver by pressing the POWER

ON/STANDBY (for VR-6060) or POWER ON/OFF and ON/

STANDBY (for KRF-V8060D) key or POWER key.

2

Press the SETUP key to enter the SETUP mode.

The Surround Back and Subwoofer speaker output selections are
displayed as follows:
16ch AMP SB
26ch AMP SW
Use the MULTI CONTROL knob or Joystick (5/∞) to select the speakers.
Press the SETUP key to proceed to the next SET UP selection.

Use

MM
MM
M/??
??
?

keys or Joystick (

2
/
3

) for the following displays.

1SP SETUP
2TEST TONE
3SP DISTANCE
4DISP MODE
5EXIT
The flow of the SET UP is as follows:
SP SETUP TEST TONE SP DISTANCE EXITDISP MODE
Front Left
Center
Front Right
Surround Right
Surround Back
Surround Left
Subwoofer
Display Selector
Display Listen
Subwoofer
Front
Center
Surround
Surround
Back
Surround
Mix
Subwoofer
Re-mix
T. TONE
MANUAL
T. TONE
AUTO
L
C
R
SR
SL
SB
SW
L
C
R
SR
SL
SW
SB
3

Select a speaker system.

1Select the SP SETUP and press the SETUP key again so
that the subwoofer setting indication “SUBW ON” appears.
L
SL S SB SR
CR
SP MUTE
OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII
A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
SW
LFE
2Use the MULTI CONTROL knob or Joystick (5/∞) to select
the appropriate subwoofer setting.
1SUBW ON : Subwoofer setting mode to the receiver is
ON.
2SUBW OFF : Subwoofer setting mode to the receiver is
OFF.
•The initial setting is “SUBW ON”.
•When the setting “SUBW OFF” is selected, the front speakers
are automatically set to “FRNT LARGE” and the procedure skips
to step 6.
Before step 6, press the SETUP key to accept the setting.
•When subwoofer output sound is required, select “FRNT
NORMAL”, or select both “FRNT LARGE” and “SW RE-MIX ON”.
•After setting SW (subwoofer) from OFF to ON, 6ch AMP setup
display will appear to enable you to re-select either SW or SB from
the surround back or subwoofer speaker terminal.
3Press the MM
MM
M key or Joystick (3) to accept the setting.
•The front speakers setting indication “FRNT” appears.
L
SL S SB SR
CR
SP MUTE
OPTICAL 6CH INPUT
COAXIAL ANALOG 96kHzfs
CINEMA EQ.
ACTIVE EQ.
DSP MODE
DTS.
MATRIX
DISCRETE
DOLBY DIGITAL
PRO LOGIC
STEREO
LOUDNESS
NEO:6
CSII
A B CLIP
AUTO DETECT THX
AUTO
RDS
RTY
MEMO
STEREO
TUNED
Surround EX
SW
LFE
4Use the MULTI CONTROL knob or Joystick (5/∞) to select
the appropriate front speakers setting.
1FRNT LARGE : Large front speakers are connected
to the receiver.
2FRNT NORMAL : Average size front speakers are con-
nected to the receiver.
•For “FRNT LARGE” selection, no sound will be heard from
subwoofer speaker even when it is set to ON. However, if you
select “SW RE-MIX ON” when subwoofer is selected, you will
be able to hear sound from the subwoofer.
When in STEREO mode, the sound goes directly to front
speaker.
5Press the MM
MM
M key or Joystick (3) to accept the setting.
•The center speaker setting indication “CNTR” appears.
6Use the MULTI CONTROL knob or Joystick (5/∞) to select
the appropriate center speaker setting.
If you selected “LARGE” as the front speakers setting,
1CNTR LARGE : A large center speaker is connected
to the receiver.
2CNTR NORMAL : An average size center speaker is
connected to the receiver.
3CNTR OFF : Center speaker setting mode to the
receiver is OFF.
If you selected “NORMAL” as the front speakers setting,
1CNTR ON : Center speaker setting mode to the re-
ceiver is ON.
2CNTR OFF : Center speaker setting mode to the re-
ceiver is OFF.
7Press the MM
MM
M key or Joystick (3) again to accept the setting.
•The surround speaker setting indication “SURR” appears.
8Use the MULTI CONTROL knob or Joystick (5/∞) to select
the appropriate surround speaker setting.
If you selected “LARGE” as the center speaker setting,
1SURR LARGE : Large surround speakers are con-
nected to the receiver.
2SURR NORMAL : Average size surround speakers are
connected to the receiver.
3SURR OFF : Surround speaker setting mode to
the receiver is OFF.
•VR6060/09-20/EN 3/11/02, 8:50 PM20