28 EN
Ambience effects
This receiver is equipped with listening modes that allow
you to enjoy an enhanced sonic ambience with a variety of
video sources.
In order to obtain the optimum effect from the surround
modes, make sure to input the proper speaker settings
beforehand. )
Surround modes
Dolby Digital
The Dolby Digital surround format lets you enjoy up to 5.1 channels
of digital surround sound from Dolby Digital program sources (such as
Laserdisc or DVD software marked ). Compared with previ-
ous Dolby surround, Dolby Digital provides even better sound quality,
greater spatial accuracy, and improved dynamic range.
Note
Although a full set of speakers (front left, right, and center, surround
left and right, and a subwoofer) is required for true 5.1 channel Dolby
Digital surround sound, this receiver lets you enjoy Dolby Digital (and
Dolby Surround) program sources, even if you connect only the front
speakers.
* LFE = Low Frequency Effects. This channel delivers separate
non-directional bass signals to the subwoofer for more dynamic
deep bass sound effects.
Although only Dolby Digital soundtracks incorporate a separate
low frequency channel, connecting a subwoofer will also improve
deep bass performance in the other surround modes.
The indication “LFE” appears in the display when a signal is
being input for this channel.
“DTS”, “DTS-ES Extended Surround”
and “Neo:6” are trademarks of Digital
Theater Systems, Inc.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro
Logic” and the double-D symbol are trademarks of Dolby
Laboratories.
“Circle Surround II and the
®
symbol are trademarks of SRS Labs,
Inc. Circle Surround II technology is incorporated under license from SRS
Labs, Inc”.
Dolby Digital EX
Dolby Digital EX is an extension of Dolby Digital technology, Dolby
Digital EX creates six full-bandwidth output channels from 6.1-channel
sources. This is done using a matrix decoder that derives three
surround channels from the two in the original recording.
This is achieved by using three different surround signals, surround left,
surround right and surround back, each driving its own array of
speakers. Think of it as adding a center channel for the rear speakers,
which give more diffuse and natural surround effect, even if you
wanted the ability to completely encircle the audience with sound,
positioning sound effects exactly where they wolud be heard in real life.
For best results, Dolby Digital EX should be used with movie soundtracks
recorded with Dolby Digital Surround EX which contain a digital flag that
will automatically activate this feature. However, for titles released
prior to late 2001, this feature has to be activated manually.
Note
Although a full set of speakers (front left, right, and center, surround
left and right, surround back and a subwoofer) is required for true 6.1
channel Dolby Digital Surround EX sound, this receiver lets you enjoy
Dolby Digital (and Dolby Surround) program sources, even if you
connect only the front speakers.
* LFE = Low Frequency Effects. This channel delivers separate
non-directional bass signals to the subwoofer for more dynamic
deep bass sound effects.
Although only Dolby Digital soundtracks incorporate a separate
low frequency channel, connecting a subwoofer will also improve
deep bass performance in the other surround modes.
The indication “LFE” appears in the display when a signal is
being input for this channel.
Dolby PRO LOGIC
II
Dolby Pro Logic II was designed specifically to provide a new sense of
spatiality, directionality and articulation of sounds from Dolby Surround
encoded sources (such as video and Laserdisc software marked
). This is achieved with an intelligent, built-in feedback
logic design, a matrix surround decoding and the decoding of stereo, full
bandwidth surround outputs. The PRO LOGIC
II modes programmed into
this receiver are “MOVIE”, “MUSIC” and “PRO LOGIC”. The “MOVIE”
mode of the PRO LOGIC
II has preset characteristics to produce a
calibrated, high-level surround sound playback while the “MUSIC” mode
has user-adjustable characteristics to offer the three optional controls, like
“Dimension”, “Center Width” and “Panorama” modes to allow optimiza-
tion of the soundfields as desired. The “Dimension” control allows the
user to gradually adjust the soundfield either towards the front or towards
the rear; the “Center Width” control allows various adjustment of the left-
center-right speakers’ balance; the “Panaroma” mode extends the front
stereo image to include the surround speakers for an exciting “wrap-
around” effect with side wall imaging.
* Optional in this mode.
Center speaker
Subwoofer (SW)*
Surround
speakers (L, R)
Front speakers (L, R)
Center speaker
Subwoofer (SW)
Surround
speakers (L, R)
Front speakers (L, R)
* Optional in this mode.
Center speaker
Subwoofer (SW)*
Surround
speakers (L, R) Surround
back speaker
Front speakers (L, R)
•VR6060/21-28/EN 3/11/02, 8:52 PM28