Connecting the subwoofer to the subwoofer
ENGLISH
Front speaker
Center unit
RCA cord | 9 RCA cord |
(Commercially |
|
available parts) |
|
When the center unit output is a single RCA jack, use an RCA cord that converts the output into the two RCA jacks as shown above.
The subwoofer output will be halved if the conversion cord is not used.
Connect the subwoofer to the subwoofer output
Notes:
•Read the instruction manuals for the connected components such as the center unit as well as this instruction manual.
•Please purchase an RCA cord that is commercially available separately.
Use the provided RCA cord 9 for connection between the sub- woofer and the separately purchased RCA cord.
•When the center unit incorporates a DSP, connect the subwoof- er to the subwoofer output
Examples
The following shows a typical connection for effective car stereo enjoyment. Connect your system by referring to the example.
Caution:
Under any circumstances, never apply inputs to the hashed terminals A and B simultaneously.
Caution:
Cover unused terminals with insulation tape to avoid short circuits.
POWER/SPEAKER REMOTE
INPUT
LINE IN L | R |
If there is no power control terminal in the center unit, connect the blue/white wire to the accessory line
(ignition key switch ACC position line).
| Blue/White |
Fuse 10A |
|
Yellow | Yellow |
6
If buzzing noise is heard from the speakers when the engine is running, attach a line noise filter (commercially available) to the power lead.
Car fuse box
Ignition key switch
Car fuse box (Main fuse)
RCA cord (Commercially |
|
available parts) | 9 RCA cord |
Center unit
(SUB WOOFER OUT,
Caution:
Connect the black lead wire ground terminal directly with a screw to an unpainted metal part of the vehicle. Turning the power ON without connecting this terminal is linked to damage of the stereo system. Be sure to connect it.
Also, painted metal panels etc., are not grounded and will not function correctly. Be careful.
Battery
English