Operation

ENGLISH

Name of each part (Remote control)

PHASE switch (Phase select switch)

 

FREQUENCY control knob

 

(Cut-off frequency control knob)

 

LEVEL control knob

 

(Input sensitivity control knob)

 

Power indicator

 

(Power display light)

Power indicator

 

Red glows

Light is OFF

The illumination on the subwoofer turns on and off in an interlocked operation with the PWR indicator on the remote control unit.

Illumination

Power ON

Power OFF

Adjusting the sound (Remote control operation)

1Turn the FREQUENCY control knob to adjust the cut-off frequency (frequencies higher than this frequency are cut off).

2Turn the LEVEL control knob to adjust the low frequencies to the desired level.

3Adjust the low frequency phase.

The low frequency tone may be variable depending on the position of the unit, its orientation or the turn-over frequency. This can be adjusted by changing the position of the PHASE switch.

Set this switch to either position according to your liking. [[0°] indicates the normal phase and [180°] means the reverse phase.

Turn the FREQUENCY control knob to adjust the balance between the bass from the rear speakers and the bass from this unit as desired.

MAX

LEVEL

MIN

LOW FREQUENCY HIGH

Fuse exchange

Exchange with the specified capacity fuse.

Caution: Be sure to replace with same capacity (amperage) as displayed on the fuse. This product is 10A.

Removal

Fuse Cover

Fuse holder

1Open the cover.

2Grasp with pliers and pull up.

Insertion

Replacement fuse 10 A

1Insert the fuse gently into the fuse holder and push in all the way with your finger.

2Close the cover.

English